Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
This article explores the now-cancelled SAE J4003-2019 standard, which provided procedures for benchmarking vehicle seats using the H-Point Machine II (HPM-II). While superseded by SAE J3103, the principles and practices outlined in J4003 remain foundational for understanding H-point determination and…
With the rapid adoption of lithium-ion batteries in automotive and industrial applications, the need for robust storage safety has become critical. The SAE J3235-2023 recommended practice addresses the unique hazards associated with storing these high-energy systems, providing mitigation strategies, failure…
Proper lubrication is critical for the longevity and efficiency of automotive axles and manual transmissions. SAE J308 2022, an SAE Information Report, provides a comprehensive overview of the performance characteristics required for modern gear lubricants. This article distills key insights…
Battery pack vents are critical components in the safety architecture of automotive lithium-ion battery systems. They serve dual purposes: enabling pressure equalization between the pack interior and the environment during normal operation, and providing emergency degassing of cell vent gases…
Battery thermal management is critical for performance, safety, and longevity of traction batteries in electric and hybrid vehicles. This article surveys key concepts from SAE J3073-2016, covering passive and active air cooling systems, design considerations, and engineering insights. Why Battery…
SAE J581-2011 specifies test methods, performance requirements, and guidelines for auxiliary high beam lamps—also known as auxiliary driving lamps—that are used to supplement the high beam of standard headlamp systems. This stabilized standard reflects mature technology and is a key…
🛠️ Note: this article focuses on engineering interpretation, not clause-by-clause translation. The SAE J699 Recommended Practice provides engineers and facility designers with a reference set of average dimensions for motor vehicles to assist in the design of docking facilities. Originally…
The SAE J43-2003 Recommended Practice provides a standardized method for determining maximum front and rear axle load ratings for industrial wheel loaders and backhoe loaders. Although cancelled due to limited demand, this document serves as a reference for consistent load…
This article provides an overview of the remanufacturing procedures for automotive starter solenoids as outlined in SAE J2242 (2008). Although the standard is now designated as noncurrent due to a loss of committee expertise, its recommendations serve as a critical…
Clear and consistent terminology is the foundation of effective engineering communication. The SAE J645 standard, revised in 2022, provides a comprehensive set of definitions for automotive transmissions, transaxles, and electrified transmissions. This updated recommended practice reflects the rapid evolution of…