Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE J1136-1987, reaffirmed in April 1987, establishes minimum performance criteria for braking systems on self-propelled vibratory and static roller This SAE Recommended Practice defines requirements for service braking systems, secondary stopping systems, and parking systems, and provides test criteria to…
Overview of SAE J1137 🛠️ SAE J1137 is a Recommended Practice that defines essential performance requirements for hydraulic valves used in motor vehicle brake systems. Originally issued in 1977, the standard was most recently stabilized in December 2012 and supersedes…
🛠️ Note: this article focuses on engineering interpretation, not clause-by-clause translation. Understanding SAE J1140-2019: Scope and Rationale SAE J1140-2019 is a recommended practice that ensures compatibility between motor vehicle fuel filler pipes and refueling vapor recovery nozzles. It provides engineers…
SAE J112a (Revised Oct 1977) specifies the temperature test, endurance test setup, and performance requirements for electric windshield wiper switches and combination wiper/washer switches. This recommended practice ensures that switches withstand extreme conditions and repeated use while maintaining electrical integrity.…
The SAE J1134-2017 standard defines a nodal mount design that streamlines the installation of clutch housings in heavy vehicles. By establishing a common bolt pattern for No. 1 and No. 2 clutch housings, this recommended practice ensures interchangeability of mounting…
SAE J1122 is a recommended practice that provides standardized checklists for specifying helical compression, extension, and torsion springs. Designed to promote completeness and consistency, it includes pre-formatted templates, conversion tables between SI and U.S. customary units, and references to complementary…
SAE J1127-2020 is the leading standard for low voltage battery cables used in surface vehicles. It defines requirements for conductor materials, insulation construction, and a comprehensive suite of tests to ensure performance and reliability in automotive electrical systems. This article…
SAE J1128-2020 defines the requirements for low voltage primary cable used in surface vehicles. It covers conductor and insulation specifications, physical and electrical properties, and a comprehensive set of test methods. This article breaks down the standard’s key elements to…
Accurate characterization of pressure drop versus flow rate is essential for selecting and applying hydraulic fluid power valves in off-road self-propelled work machines (per SAE J1116). SAE J1117-2019 provides a uniform procedure for measuring and reporting these pressure differential-flow characteristics,…
SAE J1118 is a recommended practice that defines standardized test procedures for hydraulic valves used in motor vehicle brake systems. Originally issued in 1993, this document was stabilized in December 2012 as the use of hydraulic valves declined with the…