Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE J1511-2019 defines performance and test criteria for steering systems on off-road rubber-tired machines with a rated speed exceeding 20 km Covering manual, power-assisted, and full-power steering, the standard also provides optional requirements for secondary steering systems. Cancelled in July…
The SAE J1502:2022 standard specifies the dimensions, performance requirements, and test procedures for the male half of a diagnostic coupler used in fluid power systems. These couplings are essential for monitoring and diagnosing hydraulic circuits on off-road self-propelled work machines,…
The SAE J1503 standard provides a uniform test procedure for measuring the environmental performance of heating, ventilating, and air-conditioning (HVAC) systems in operator enclosures of off-road self-propelled work machines. First issued in 1998 and reaffirmed in 2021, it establishes minimum…
SAE J1507 (issued 1987) provides essential guidelines for anechoic chambers used to evaluate the radiated susceptibility of motor vehicles to electromagnetic fields across the demanding frequency range of 20 MHz to 18 GHz. This information report covers chamber design objectives,…
SAE J1493-2024 establishes safety requirements for guarding the starter system energization on off-road self-propelled work machines (per SAE J1116) and agricultural tractors (per ANSI/ASAE S390). The standard aims to prevent hazardous machine movement that can result from bypassing the starter…
The automotive industry relies on standardized test methods to ensure consistency and reliability in friction material evaluation. SAE J1499-2012, titled “Band Friction Test Machine Guidelines,” is a recommended practice specifically designed for testing band friction materials used in automatic transmissions.…
Water contamination in diesel and biodiesel fuels poses significant risks to engine reliability and longevity. The SAE J1488 recommended practice provides a standardized test method to evaluate the ability of fuel/water separators to remove emulsified or finely dispersed water. This…
SAE J1489-2000 establishes a standardized method for estimating the total retardation capability of heavy trucks and buses on downhill grades. It enables engineers to calculate the maximum grade maintainable at various control speeds using engine drag, retarders (engine-speed, driveline, or…
This article provides an overview of SAE J1492, the recommended practice for measuring the exterior exhaust sound level of light vehicles under stationary conditions using the engine speed sweep method. Updated in 2023, the standard now covers all propulsion technologies…
SAE J1472 was a long-standing standard that specified braking performance requirements and test procedures for rollers (compactors). However, as of December 2013, this standard has been cancelled and its content incorporated into the international standard ISO 3450. This article provides…