Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Introduction and Rationale SAE J2601-4-2024, issued in October 2024, provides the technical framework for safely fueling light-duty gaseous hydrogen vehicles at ambient temperatures. The standard defines both variable-orifice and fixed-orifice fueling protocols, addressing the critical need to prevent overheating of…
SAE J2602-1 defines a standardized implementation of the Local Interconnect Network (LIN) protocol for low-speed vehicle serial data communication. This recommended practice focuses on enabling cost-effective ASIC designs for simple devices such as switches and sensors, reducing wiring complexity while…
The Local Interconnect Network (LIN) remains a cost-effective and widely-used communication bus for automotive subsystems such as doors, seats, and steering wheel controls. To ensure consistent operation across different manufacturers and suppliers, the SAE J2602-2-2021 standard defines a basic conformance…
SAE J2601-2-2023, titled “Fueling Protocol for Gaseous Hydrogen Powered Heavy Duty Vehicles,” establishes the performance requirements and safety limits for hydrogen dispensing systems used to fuel heavy-duty surface vehicles, particularly transit buses, at 35 MPa (with optional pressures). This information…
As the hydrogen fuel cell market expands beyond light-duty vehicles into industrial applications, the need for a standardized fueling protocol becomes critical. SAE J2601-3-2022 fills this gap by establishing safety limits, performance requirements, and fueling methods for dispensers serving Hydrogen…
Temperature Test Protocol The temperature test ensures basic functionality of the ignition switch across extreme operating conditions. The switch must be manually cycled for 10 complete cycles at design electrical load after a 1-hour exposure at each of the following…
SAE J2595-2015 is a stabilized recommended practice that establishes performance, material, design requirements, and design guidelines for sealed beam motor vehicle headlamps. Created as a result of rewriting SAE J1383, this standard consolidates all sealed beam information into a single…
🛠️ The SAE J260-1990 recommended practice provides a uniform static test method for assessing rear underride guards on heavy vehicles. Developed from field observations of rear-end collisions and analysis of typical accidents, this standard aims to reduce the likelihood of…
The SAE J2587 recommended practice provides essential guidelines for fuel tank closures used with fuel level senders and fuel delivery systems. It focuses on ensuring interchangeability, compatibility, and performance across different fuel tank designs while allowing flexibility in specific design…
Overview and Scope SAE J2588-2004 is an SAE Information Report that establishes uniform procedures for assuring the manufactured quality, installed utility, and performance of automotive remote steering controls other than those provided by the original equipment manufacturer (OEM). These adaptive…