Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🏛️ Scope and Organizational Framework ASTM D16-24 serves as the master glossary for technical terms used across the jurisdiction of ASTM Committee D01 on Paint and Related Coatings, Materials, and Applications. It establishes standardized definitions to ensure consistency and clarity…
📐 Scope, Terminology, and Referenced Documents ASTM standard D1596 −14 (Reapproved 2023), titled “Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material,” establishes a laboratory procedure for evaluating the shock mitigation performance of cushioning materials. This is achieved…
📐 Scope and Terminology This test method, ASTM D1598-24, determines the time-to-failure of thermoplastic and reinforced thermosetting/resin pipe under constant internal pressure. It characterizes plastics in pipe form under prescribed conditions. Values are in inch-pound units as standard. Key terminology…
📐 Equipment, Scope, and Applicability ASTM D1586/D1586M defines the widely recognized Standard Penetration Test (SPT), an in-situ test that combines soil sampling with penetration resistance measurement. The method specifies a 140 lb [63.5 kg] hammer dropping 30 in. [750 mm]…
ASTM D1587/D1587M-15 establishes the standard practice for thin-walled tube sampling of fine-grained soils to recover intact samples for geotechnical laboratory testing. This method ensures minimal disturbance, allowing accurate determination of engineering properties such as strength, compressibility, and permeability. Below are…
ASTM D1593-22 covers nonrigid, unsupported vinyl chloride plastic film and sheeting where the resin composition contains at least 90% vinyl chloride. Film is defined as material 0.075 to 0.25 mm (3 to 10 mils) in thickness, while sheeting exceeds 0.25…
🔬 Overview and Scope of the Test Method ASTM D1583-01 (Reapproved 2024), officially titled Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films, provides a definitive procedure for measuring the pH, acidity, or alkalinity of organic adhesives in…
🧪 Scope and Principle of ASTM D1585-24 ASTM D1585-24 provides standardized test methods for determining the fatty acids content of pine chemicals, including rosin, tall oil, and related products. As outlined in Section 1.1 of the standard, these methods are…
The ASTM D1579-01 standard provides a test method for determining the filler content in phenol, resorcinol, and melamine adhesives. This method is crucial for quality control and characterizing adhesive performance. 📐 Scope and Significance This test method is suitable for…
🧪 Test Method Principle and Required Apparatus ASTM D1582-98 provides a direct gravimetric method for determining the nonvolatile content (total solids) of liquid phenol, resorcinol, and melamine adhesives. The method is applicable to adhesives containing high-boiling and low-boiling volatile organic…