Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🔬 Scope and Significance Standard D1653-13 (Reapproved 2021) specifies two test methods—the Dry Cup Method (Method A) and the Wet (Payne) Cup Method (Method B)—for determining the water vapor transmission (WVT) rate of films made from paints, varnishes, lacquers, andā¦
ASTM D1654-24 defines a standardized methodology for evaluating the corrosion resistance of painted or coated metal specimens after exposure to corrosive environments. Developed by Subcommittee D01.25, this test method provides a consistent framework for assessing creepage from a scribe mark,ā¦
🧪 Composition and Chemical Requirements This specification covers the pigment commercially known as strontium chromate, suitable for use in protective or decorative coatings. The pigment must be commercially pure strontium chromate free of extenders and organic matter, except for properties-enhancingā¦
📐 Scope and Significance of the Epoxy Content Test ASTM D1652‑11 (Reapproved 2019) specifies a robust procedure for the quantitative determination of epoxide in epoxy resins. The test method is designed to accurately measure epoxide levels in a wide rangeā¦
The ASTM D1647–89 (Reapproved 1996) standard outlines two reliable methods for gauging the durability of dried varnish films. These tests are essential for a meaningful comparison of protective coatings exposed to water and mild chemical agents, bridging the gap betweenā¦
📜 Scope and Chemical Composition ASTM D1648 – 86 (Reapproved 2020) provides the standard specification for basic lead silicochromate pigment, a corrosion-inhibiting pigment commonly utilized in protective coatings. This specification defines two distinct types of this pigment based on particleā¦
ASTM D1644‑01 (Reapproved 2023) establishes standard test methods for determining the nonvolatile content of varnishes. The nonvolatile fraction represents the material that remains after the volatile solvents are driven off under controlled heat. This measurement serves as an approximate indicatorā¦
📐 Scope and Core Definitions ASTM D1646-19a establishes test methods for measuring critical characteristics of rubber using the Mooney viscometer. The primary characteristic, Mooney viscosity, is defined as the shearing torque resisting the rotation of a cylindrical metal disk (orā¦
📋 Scope and Significance of D1640/D1640M The ASTM D1640/D1640M −14 (Reapproved 2022) standard, approved for use by U.S. Department of Defense agencies, provides a comprehensive framework for evaluating the drying, curing, and film formation stages of organic coatings. The valuesā¦
🛡️ Scope and Significance of Outdoor Varnish Testing ASTM D1641-04 establishes a standardized procedure for evaluating the durability of varnishes applied to a wooden substrate. The values stated in SI units are regarded as the standard. The practice is designedā¦