Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🔬 Overview of the Flex Test Method ASTM D2097 – 03 (Reapproved 2023), developed in cooperation with the American Leather Chemists Association, provides a standardized procedure for evaluating the flexibility and adhesion of finishes applied to upholstery leather. This testā¦
ASTM D2098-21 provides a standardized method for evaluating the dynamic water resistance of shoe upper leather using the Dow Corning Leather Tester. This test simulates the repeated flexing a shoe vamp undergoes in wet conditions, assessing how well the leatherā¦
📐 Specimen Geometry and Types This standard specifically determines the relative tensile strength of adhesives using bar and rod specimens bonded in a butt-joint configuration. The preparation of these specimens must strictly follow the guidelines provided in Practice D2094 (Practiceā¦
Standard test method D2096-11 (Reapproved 2024), issued by ASTM International, provides a standardized laboratory procedure for evaluating the colorfastness of colored leathers designed to withstand frequent laundering. This method simulates repeated mechanical washing to assess color loss and the simultaneousā¦
🧪 Physical and Chemical Surface Treatments in ASTM D2093-03 (2017) ASTM D2093-03 (Reapproved 2017) provides standardized methods for preparing plastic surfaces prior to adhesive bonding to ensure consistent laboratory test results. The standard specifically outlines two primary categories of surfaceā¦
📐 Specimen Geometry and Types ASTM D2094-00 specifies three types of adherend geometries for butt-joined adhesion tests: the bar specimen (Fig. 1), the rod specimen (Fig. 2), and the modified bar specimen (Fig. 3). The bar specimen is exclusively usedā¦
🧪 Scope and Standard Terminology ASTM D2090-98 establishes a standardized visual procedure for evaluating the clarity and cleanness of any unpigmented liquid used in paints and inks. This includes fatty oils and acids, drier solutions, solvents, varnishes, resin solutions, clearā¦
ASTM D2091-96 (Reapproved 2024) is a standard test method for evaluating the print resistance of dried lacquer films. This method simulates pressure conditions during packaging, shipping, and warehousing to assess potential imprinting and appearance changes. 📐 Test Apparatus and Materialsā¦
🛡️ Overview of Surface Preparation for Galvanized Steel ASTM D2092-95 provides a standard guide for preparing zinc-coated (galvanized) steel surfaces for painting. This guide is essential for ensuring that paint coatings achieve the necessary adhesion for durable service. It appliesā¦
📐 Scope and Test Summary ASTM D2087‑22 provides a standardized procedure for determining the total iron content in formaldehyde solutions. This quantitative analysis is essential for evaluating the purity of formaldehyde, which is widely used as a chemical intermediate andā¦