admin

📐 Scope and Significance This standard, designated ASTM D1815‑00 (Reapproved 2021), covers the determination of the amount of water absorbed by leather at 23 ± 2 °C by immersion under static conditions. It is particularly adapted for vegetable‑tanned sole leather…

📐 Specimen Types and Electrode Configuration ASTM D1816 is the standard test method for determining the dielectric breakdown voltage of insulating liquids using VDE electrodes. The scope of this method is broad, covering oils of petroleum origin, silicone fluids, high…

📏 Test Method Overview and Significance ASTM D1817-05 (Reapproved 2021) specifies a standardized procedure for determining the density of solid chemicals used as rubber additives. As stated in the scope, the test method is specifically designed for the density of…

ASTM D1813-13 (Reapproved 2023) provides a precise, standardized method for determining the thickness of leather test specimens using a calibrated dead-mass dial gauge. Developed under the jurisdiction of ASTM Committee D31 on Leather, this method is integral to calculating critical…

📐 Apparatus and Gage Requirements The ASTM D1814-70 (Reapproved 2021) standard specifies two types of gages for measuring leather unit thickness: a spring-type gage and a standard wedge-type gage. The spring-type gage features a flat presser foot and anvil with…

ASTM D1807-00 outlines standardized procedures for measuring the refractive index and specific optical dispersion of electrical insulating liquids used in capacitors, transformers, circuit breakers, and oil-filled cables. The standard defines two approaches: a routine method and a more precise referee…

🧪 Scope and Significance of Askarel Specific Gravity ASTM D1810-94 describes the standardized measurement of specific gravity (relative density) for askarels. Askarels are chlorinated aromatic hydrocarbon liquids used as electrical insulation and coolant in transformers and capacitors. This method applies…

📐 Scope and Methodology Definition ASTM D1796-22, formally designated as API Manual of Petroleum Measurement Standards (MPMS) Chapter 10.6, describes the laboratory determination of water and sediment in fuel oils. The procedure applies to a measurement range of 0 %…

📦 Scope and Significance This standard practice covers the sampling of packaged carbon blacks for shipment in bags, cartons, flexible intermediate bulk containers (FIBC), or other non-bulk packages. It is used to obtain representative samples to determine the average quality…

📖 Scope and Test Principle ASTM D1792-17 (Reapproved 2023) provides a standardized laboratory method for evaluating the long-term removability of water-emulsion floor polishes. Defined in Scope 1.1, this test method covers the determination of the relative ease of removing dried…