Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope, Equipment, and Terminology Under D1078-11 ASTM D1078-11 (Reapproved 2019), also designated as 195/98, establishes a standardized test method for determining the distillation range of volatile organic liquids. The procedure is applicable to liquids that boil between 30 °Cā¦
📐 Specimen Preparation and Conditioning ASTM D1074 covers the compressive strength testing of compacted asphalt mixtures. Specimens are prepared from laboratory-mixed or plant-produced materials, following strict sampling protocols per D75, D140, and D979. The standard cylindrical specimen typically measures 4.00ā¦
🧪 Test Purpose and Scope Standard D1075 (also designated AASHTO T165) evaluates the moisture susceptibility of compacted bituminous mixtures containing asphalt cement. The test measures the loss of compressive strength resulting from the action of water. A numerical Index ofā¦
📜 Scope and Significance of D1071-17 ASTM D1071-17 specifies standardized test methods for the volumetric measurement of gaseous fuel samples, including liquefied petroleum gases (LPG) in the gaseous state at normal temperatures and pressures. The selection of apparatus covered inā¦
This article details the ASTM D1072-23 standard test method for total sulfur measurement in fuel gases. Utilizing combustion and barium chloride titration, it addresses sulfur concentrations from 25 to 700 mg/m³ for various gaseous fuels. 📐 Scope and Interferences ASTMā¦
🏗️ Scope, Terminology, and General Characteristics According to Section 1 of the standard, this specification covers fine aggregate intended for use in asphalt paving mixtures. It is designed to describe material from a single source. The standard defines fine aggregateā¦
🔬 Scope and Summary of Test Methods ASTM D1068-15 provides standardized procedures for determining the concentration of iron in water. The standard covers methods for total recoverable iron, dissolved iron, and ferrous iron. By performing the total and dissolved ironā¦
The ASTM D1070-03 standard provides comprehensive test methods for measuring the relative density of gaseous fuels. These methods are essential for laboratory analysis, control, and reference purposes, ensuring accuracy in gas measurement under standardized conditions. 🔬 Test Methods Overview Thisā¦
📐 Scope and Applicability of D1066-18 This standard, designated D1066-18, provides a comprehensive practice for the sampling of saturated and superheated steam. It is applicable to steam produced in fossil fired and nuclear boilers, or by any other process meansā¦
📐 Test Method Selection and Scope ASTM D1067 −16 (Reapproved 2024) provides standardized procedures for determining the acidity or alkalinity of all types of water. Hydrogen or hydroxyl ions present by virtue of dissociation or hydrolysis of solutes are neutralizedā¦