Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
The ASTM D113/D113M standard, also designated as AASHTO T51, specifies the test method for determining the ductility of asphalt materials. This test measures the distance to which a briquet specimen of the material elongates before breaking under controlled conditions. 📐ā¦
📋 Scope and Significance These test methods, designated D1131-97, are intended for evaluating rosin oils to ensure they meet specifications for intended uses. Rosin oil encompasses oils obtained from dry destructive distillation of rosin, with or without redistillation, including compoundedā¦
📐 Scope and Test Methods Overview ASTM D1125-23 specifies standard test methods for measuring electrical conductivity and resistivity of water. The standard includes two test methods: Test Method A for field and routine laboratory measurement of static (non-flowing) samples, andā¦
🧪 Scope and Principle of D1126-17 ASTM D1126-17 is a standard test method for determining total hardness in water using a complexometric titration with disodium ethylenediamine tetraacetate (EDTA). Hardness is primarily caused by calcium and magnesium ions, which are theā¦
ASTM D1129-24, officially designated as the Standard Terminology Relating to Water, serves as the authoritative lexicon for all standards developed under the jurisdiction of ASTM Committee D19 on Water. Released under the fixed designation D1129 and approved on November 1,ā¦
This test method, designated as ASTM D1122-22, outlines the procedure for determining the relative density of engine coolant concentrates and engine coolants using a hydrometer. It is applicable to glycols, glycerin, heat transfer fluids, and aqueous engine coolants, providing essentialā¦
The ASTM D1123-22 standard defines test methods for the determination of water content in new or unused glycol-based engine coolant concentrates using Karl Fischer reagent. It encompasses two distinct procedures: a volumetric method (Test Method A) and an automatic coulometricā¦
📐 Overview and Significance The ASTM D1119-22 standard provides a reliable method for determining the percent ash content of engine coolants and antirusts, as packaged or after use. This test method is essential for identifying the type of coolant andā¦
🔍 Overview and Test Summary This test method, designated D1120-22, covers the determination of the equilibrium boiling point of engine coolants, including both concentrates and prediluted solutions. The equilibrium boiling point indicates the temperature at which the sample will startā¦
📊 Significance and Use of Reserve Alkalinity Reserve alkalinity is a critical parameter for engine coolants and antirusts, defined as the volume of 0.100 N hydrochloric acid required to titrate a 10 mL sample to a pH of 5.5. Thisā¦