Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D5754 −95 (Reapproved 2006) is a standard guide for displaying the results of chemical analyses of groundwater for major ions and trace elements using trilinear diagrams for two or more analyses. It is the first of several documents intended…
📐 Overview and Applications ASTM D5753-18 is a standard guide for planning and conducting geotechnical borehole geophysical logging. It covers documentation, general procedures, and commonly used logging methods for site characterizations in geology, engineering, groundwater, and environmental studies. The guide…
📐 Scope and Key Definitions for D5751-99 ASTM D5751-99 (Reapproved 2019) establishes performance levels for adhesives used in laminate joints for nonstructural lumber products. Such products encompass a wide range of bonded assemblies, including interior and exterior mouldings, window and…
📐 Scope and Intended Application ASTM D5752-10 (Reapproved 2017) defines the general, physical, chemical, and performance requirements for Supplemental Coolant Additives (SCAs) used to precharge heavy-duty engine cooling systems. These additives ensure adequate protection against corrosion, cavitation, and scale formation…
📐 Understanding Width and Length Specifications ASTM D5750/D5750M-95 (Reapproved 2020) provides a standardized guide for specifying the width and length of general-purpose pressure-sensitive tape. This guide is critical for aligning expectations between suppliers and users by defining modular measurement systems,…
ASTM D575‑91 (Reapproved 2024) is a standard test method for determining the compression‑deflection characteristics of rubber compounds, excluding hard rubber and sponge rubber. It provides two distinct procedures for measuring compression stiffness, which are crucial for material development and quality control…
📐 Scope and Significance ASTM D5748-95 (Reapproved 2019) establishes a standardized procedure for determining the protrusion puncture resistance of stretch wrap film. The test method evaluates a film’s ability to resist penetration by a probe at a standard low rate,…
📋 Scope and Classification of Reinforced and Plain Gummed Tape ASTM D5749-24 establishes the standard specification for plain and reinforced paper gummed adhesive tapes used primarily for securing and banding paper products and closing fiberboard boxes. This standard supersedes federal…
ASTM D5747/D5747M-21, developed under the jurisdiction of ASTM Committee D35 on Geosynthetics and its Subcommittee D35.02 on Endurance Properties, defines a standardized practice for evaluating the chemical resistance of geomembranes upon exposure to liquids. This practice is essential for determining…
ASTM D5746−24 provides a standardized classification system for federally-owned real property undergoing sale, lease, or transfer. Developed to satisfy the disclosure requirements of Section 120(h) of the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), as amended by the Community…