Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D5765-16 establishes a standardized practice for the solvent extraction of total petroleum hydrocarbons (TPH) from soils and sediments using closed vessel microwave heating. This practice is designed to prepare samples for analytical methods such as gravimetry or gas chromatography,…
📋 Scope and Application of D5763-24 ASTM D5763-24 represents a critical standardized method for evaluating the oxidation and thermal stability of gear oils. Developed under the jurisdiction of Subcommittee D02.09.0D on Oxidation of Lubricants, the current edition was approved on…
📐 Test Method Scope and Significance This test method, designated D5762-24, covers the determination of nitrogen in liquid hydrocarbons, including petroleum process streams and lubricating oils, in the concentration range from 40 µg/g to 10,000 µg/g nitrogen. For light hydrocarbons…
📋 Scope and Application ASTM D5761-24 is a standard practice for the emulsification and suspension of multiphase fluid waste materials. It covers the generation of a uniform mixture from samples that are primarily liquid, facilitating sample preparation, transfer, and analysis.…
ASTM D5759-12 (Reapproved 2020) provides a comprehensive framework for the characterization of fly ash derived from coal combustion. It specifically covers fly ash from standard coal combustion, coal combusted in the presence of alkaline materials (often termed clean coal combustion),…
🔍 Overview and Terminology of D5760-19 Standard D5760-19 covers performance requirements for lubricants in nonsynchronized heavy-duty manual transmissions. Key terms include nonsynchronized transmission, defined as a transmission without synchronizing mechanisms for gear engagement, though auxiliary range gears may use pneumatic…
ASTM D5758‑01 (Reapproved 2021) establishes a standardized X‑ray diffraction (XRD) protocol for determining the relative crystallinity of zeolite ZSM‑5. The test method calculates a number that is the ratio of the intensity of a portion of the XRD pattern of…
⚙️ Apparatus and Test Setup The standard defines a specific air jet attrition system to ensure reproducible results. The core of the apparatus is a vertical stainless steel attrition tube with specified dimensions. At the bottom of this tube, three…
🔬 Overview and Scope of ASTM D5755-09 This standard test method, designated D5755 −09 (Reapproved 2014), covers a procedure to identify asbestos in non-airborne dust and provide an estimate of the surface loading of asbestos in the sampled dust, reported…
🔬 Scope and Methodology of ASTM D5756-02 (Mass Surface Loading) ASTM D5756-02 (Reapproved 2008) specifies a standardized procedure for the microvacuum sampling of non-airborne dust followed by indirect preparation and Transmission Electron Microscopy (TEM) analysis. The primary output of this…