Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Test Method Overview and Scope ASTM D5801-24 is a standard test method for determining the toughness and tenacity of asphalt materials, primarily elastomer-modified asphalts but applicable to all asphalt types. The test is conducted at a controlled pull rate…
🟦 Scope, Materials, and Unit Systems This standard practice, designated D580/D580M – 24, serves as the primary document for greige woven glass tapes and webbings woven from “E” electrical classification glass fiber yarns. As specified in Section 1.1, this practice…
⚙️ Test Overview and Procedure Families ASTM D5800-21 defines the standard test method for measuring the evaporation loss of lubricating oils (particularly engine oils) by the Noack method. The test measures the mass of volatile oil vapors lost when a…
The ASTM D5799-23 standard outlines a titrimetric test method for the determination of peroxides in commercial butadiene. This method is critical for safety and quality control, as peroxides, specifically butadiene polyperoxide, pose severe explosion hazards. The standard measures peroxide content…
📐 Specification Scope and Methanol Content Requirements The ASTM D5797-21 specification outlines the requirements for automotive methanol fuel blends (M51–M85) intended for use in methanol-capable flexible-fuel and dedicated spark-ignition engines. This standard defines a fuel blend containing 51 % to 85 %…
🌿 Scope and Composition of D5798-21 ASTM D5798-21 establishes the requirements for automotive ethanol fuel blends intended for use in ground vehicles equipped with flexible-fuel spark-ignition engines. The standard defines a fuel blend containing 51 % to 83 % by…
ASTM D5796-24 defines a destructive test method for precisely measuring the dry film thickness (DFT) of thin-film organic coil-coated systems. By cutting a shallow-angle crater into the coating with a specialized boring device and observing the resulting cross-sectional rings under…
📐 Scope and Significance This guide is used for the determination of nitrate anion in electrocoat bath permeates by chemically suppressed and non-suppressed ion chromatography (IC). Other anions, with the exception of phosphate, may also be determined using this guide.…
The D5795-16 (Reapproved 2024) test method establishes a standardized procedure for measuring the liquid water absorption of coated wood and wood-based products using the Cobb ring apparatus. This method quantifies the amount of water that permeates a paint film and…
📐 Scope, Terminology, and Significance ASTM D5793-18 (Reapproved 2022) provides a standardized test method for measuring the number of binding sites per unit length or width in machine-made pile yarn floor coverings. This method is applicable to woven, knitted, and…