Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📋 Overview and Purpose of ASTM D5821-13 ASTM D5821-13 (Reapproved 2017) provides the standard procedure for determining the percentage, by mass or by count, of fractured particles in coarse aggregates. This test is critical for evaluating aggregate quality, as outlined…
📐 Guide Overview and Scope ASTM D5819-22 is a standard guide that provides a systematic approach for designers and specifiers to determine environmental factors affecting the post-construction service life of geosynthetics. It recommends test methods for experimental evaluation of durability…
🔬 Introduction and Scope of D5820-95 The ASTM D5820-95 (Reapproved 2023) standard defines a specific nondestructive evaluation method for assessing the continuity of parallel geomembrane seams that feature an unwelded air channel. This “air channel” between the two distinct seamed…
ASTM D5818-22 provides a standardized framework for the exposure and retrieval of geosynthetic samples from full-scale test sections. This practice is essential for evaluating the impact of installation techniques on the physical integrity and performance of geosynthetic materials. By comparing…
The ASTM D5817-20 standard specifies practices for reducing, blending, and drying gross samples of pelleted carbon black to prepare them for subsequent testing. This standard is essential for ensuring that test samples are representative and that measured characteristics are consistent…
ASTM D5815-95 (Reapproved 2001) defines a liquid chromatographic (LC) procedure designed for the separation and quantitation of phenolic antioxidants and erucamide slip additives in Linear Low-Density Polyethylene (LLDPE). The method relies on solvent extraction followed by reverse phase chromatography with…
🧪 Significance of the STSA Method ASTM D5816-99 defines the standard test methods for determining the external surface area of carbon black. This is achieved through the Statistical Thickness Surface Area (STSA) method. Unlike total surface area measurements, the STSA…
ASTM D5814-23 is a standard practice for determining contamination in recycled poly(ethylene terephthalate) (PET) flakes and chips using a plaque test. The method involves melting a representative sample into a transparent wafer or plaque, which is then examined for visual…
The ASTM D5812-96 (Reapproved 2002) standard, an American National Standard, defines the test method for the determination of organochlorine pesticides in water by capillary column gas chromatography. This rigorous method requires significant analyst expertise and emphasizes the importance of proper…
📐 Scope and Application of D5813-04 ASTM D5813-04 (Reapproved 2018) provides the standardized specification for Cured-In-Place Thermosetting Resin Pipe (CIPP) systems. This specification governs pipe with equivalent diameters ranging from 4 through 132 inches (100 to 3353 mm). The primary…