Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📋 Overview and Scope ASTM D6215-98 provides a standardized guide for evaluating the removal of oily soils from metal surfaces. It employs a fluorescent dye tracer to quantitatively measure residual oil levels. This guide is applicable to various cleaning scenarios,…
📐 Scope and Application This standard practice, ASTM D6216-20, establishes the procedure for opacity monitor manufacturers to certify conformance with design and performance specifications for continuous opacity monitors. It applies to monitors used in regulatory environmental monitoring where opacity standards…
📐 Scope and General Specifications ASTM D6214/D6214M – 23 provides an accelerated, destructive test method specifically tailored for verifying the integrity of field seams created by chemical fusion processes. It is applicable to both scrim-reinforced and nonreinforced geomembranes used in…
ASTM D6213-17 provides standardized procedures for evaluating the chemical resistance of geogrids when exposed to liquids. This practice outlines methods to measure changes in physical and mechanical properties after immersion in test solutions representative of end-use conditions. It is designed…
🧪 Overview and Scope of ASTM D6212-99 The standard ASTM D6212-99, titled “Standard Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Rateometric Colorimetry,” specifies a procedure for determining sulfur in aromatic hydrocarbons and their derivatives. The method…
📜 Specification Scope and Key Requirements ASTM D6210-17 establishes the comprehensive requirements for fully‑formulated glycol‑based engine coolants intended for heavy‑duty engine cooling systems. These coolants are engineered to provide robust protection against corrosion, cavitation, freezing, and boiling during both winter…
🔍 Scope and General Requirements This specification covers fully-formulated propylene glycol-base engine coolants for heavy-duty engines, including both concentrates and prediluted solutions. Concentrates are designed for use at 40 to 60 % propylene glycol by volume in water of suitable…
Standard D6209-21 provides a comprehensive framework for the determination of polycyclic aromatic hydrocarbons (PAH) in ambient air. This test method integrates high-volume sampling with gas chromatography/mass spectrometry (GC/MS) analysis to accurately quantify both gaseous and particulate-phase PAH compounds at environmentally…
📐 Overview and Purpose of ASTM D6208-07 ASTM D6208-07 (Reapproved 2020), titled Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement, provides a rapid and reproducible laboratory procedure for evaluating pitting corrosion susceptibility. The test…
ASTM D6207-03 (Reapproved 2019) specifies a test method for evaluating the dimensional stability of fabrics exposed to cyclic changes in humidity and temperature, particularly for panel and screen systems such as acoustic panels and office partitions. The method collects data…