Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope and Design Parameters This specification, designated D3982‑21, covers contact molded “fiberglass” ducts intended for handling corrosive fumes and process gases. It emphasizes strength and corrosion resistance for operations exceeding 180 °F (82.2 °C). Ducts are designed for pressures up toā¦
📖 Scope and Overview of ASTM D3977‑97 ASTM D3977‑97 (Reapproved 2019) defines standardized laboratory procedures for determining sediment concentrations in water and wastewater samples from lakes, reservoirs, and flowing streams. In quiescent waters, the measured concentration closely matches the in‑situā¦
🧪 Test Organism and Ecological Principle Algae are natural inhabitants of surface waters and are found in almost every water environment exposed to sunlight. When large amounts of nutrients are available, excessive growths referred to as blooms can occur, releasingā¦
📜 Purpose and Significance of D3975-93 ASTM Standard D3975-93 (Reapproved 2019) provides a standardized framework for the development and use of samples in collaborative testing programs, specifically targeting the chemical analysis of sediments and similar materials. The scope of thisā¦
📜 Scope and Significance of D3976-22 ASTM D3976-22 provides standard procedures for preparing sediment test samples from field collections in streams, rivers, ponds, lakes, and oceans. The primary goal is the controlled removal of occluded water and moisture to ensureā¦
ASTM D3974-09 (Reapproved 2023) provides standardized practices for the partial extraction of trace elements from soils, bottom sediments, suspended sediments, and waterborne materials. These practices are essential for environmental monitoring and pollution detection, focusing on extractable concentrations rather than totalā¦
The ASTM D3972-09 standard (reapproved 2015) specifies a radiochemical method for the determination of alpha-particle-emitting isotopes of uranium in water. The method employs chemical separation techniques followed by alpha pulse-height analysis, ensuring accurate isotopic quantification for environmental and process monitoringā¦
🧪 Scope and Applications ASTM D3973-85 describes a test method for analyzing low-molecular weight halogenated hydrocarbons in water, primarily drinking water, but it is also suitable for environmental and waste waters with proper validation. This method covers halomethanes, haloethanes, andā¦
ASTM D3970‑05 (Reapproved 2023), titled “Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination,” is a widely recognized method under the jurisdiction of ASTM Committee D01 on Paint and Related Coatings. This method specifies a titrimetric procedure forā¦
📖 Scope, Summary, and Significance of the Test ASTM D3971-89 (Reapproved 2019) defines a standard test method for measuring dichloromethane-soluble matter in cellulose, applicable to dissolving-type cellulose pulps prepared from cotton or wood. The extracted substances—commonly waxes, fats, resins, andā¦