Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope and Classification ASTM D4024‑22 covers machine‑made glass‑fiber‑reinforced thermosetting‑resin (RTRP) flanges, excluding contact‑molded types. It specifies requirements for materials, workmanship, performance, and dimensions. Flanges may be produced integrally with a pipe or fitting, with a socket for adhesive bonding,…
📐 Scope and Material Composition This specification, formally designated as Standard Specification for Coal Tar Roof Cement, Asbestos Containing under ASTM D4022/D4022M, establishes the requirements for cement used in trowel application for coal tar roofing and flashing systems. According to…
📐 Key Terminology for Humidity Measurements The ASTM D4023-82 standard provides essential definitions for humidity measurements. Absolute humidity (dv) is the ratio of the mass of water vapor mv to the total volume V of moist air, expressed as dv…
📐 Scope and Summary of the Distillation Test The D402/D402M-24 test method provides a standardized distillation procedure for cutback asphalts, focusing on the determination of volatile constituents. The values in this standard are expressed in either SI units or inch-pound…
🧪 Scope and Material Definition ASTM D4020-18 provides a standardized specification for the identification of virgin, natural color, unmodified homopolymer ultra-high-molecular-weight polyethylene (UHMWPE) molding and extrusion materials. Its primary purpose is to offer a framework for sellers and purchasers to…
🔬 Summary of Test Method and Scope ASTM D 4019 – 94a defines a standard procedure for determining moisture in plastics using coulometric regeneration of phosphorus pentoxide (P₂O₅). The method is applicable for moisture contents © 2026 TNLab — This…
📐 Scope and Material Applicability This test method is applicable to all paints and paint materials, including resins, monomers, and solvents, with the exception of aldehydes and certain active metals, metal oxides, and metal hydroxides. The evaluation was limited to…
📐 Specimen Preparation and Configuration According to D4018-23, tensile testing is performed on resin-impregnated and consolidated specimens made from continuous filament carbon and graphite yarns, rovings, and tows. This method ensures uniform load transfer for accurate tensile property evaluation. The…
🔬 Scope and Summary of Test Method This test method, designated under ASTM D4016 – 14, establishes the laboratory procedure for determining the viscosity of catalyzed chemical grouts using a rotational (Brookfield-type) viscometer. The method is specifically calibrated for a…
📐 Scope, Types, and Terminology ASTM D4014-23 defines the requirements for bearings used in bridge construction. These components can be composed entirely of elastomer (plain elastomeric bearings) or consist of alternating laminates of elastomer and steel reinforcement (steel-laminated elastomeric bearings).…