Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📋 Scope and Application This guide, designated D6328-18, is under the jurisdiction of ASTM Committee D22 on Air Quality and provides QA protocols for chemical analysis of atmospheric wet deposition (AWD). It covers anions (chloride, nitrate, and sulfate) and cationsā¦
📋 Scope and Practice Overview ASTM D6326-22 covers the selection of maximum transit-rate ratios and depths for isokinetic suspended-sediment samplers, specifically the U.S. series developed by the Federal Interagency Sedimentation Project (FISP). The practice is essential for ensuring that sedimentā¦
ASTM D6327-10 (Reapproved 2021) specifies the standard procedure for determining Radon Decay Product (RDP) concentrations and the corresponding Working Level (WL) in indoor atmospheres using the grab sampling filter technique. This active sampling method is essential for diagnostic indoor airā¦
ASTM D6325 – 98 (Reapproved 2019) defines a standardized procedure for measuring the open assembly time of troweled carpet mastic adhesives. This parameter is critical for ensuring a proper initial bond, allowing installers sufficient time to position the carpet whileā¦
📐 Specimen Geometry and Dimensional Tolerances ASTM D6324 establishes the minimum dimensional requirements for individually packaged male condoms made from polyurethane. Key metrics include the nominal flat width, overall length, and single-wall thickness. Dimensional testing must be performed in accordanceā¦
ASTM D6322-24 serves as a pivotal reference document that consolidates national and international test methods for textile care procedures. It is designed to guide manufacturers, retailers, testing organizations, and importers in selecting appropriate standards for evaluating textile and apparel propertiesā¦
The ASTM D6323-19 standard serves as a definitive guide for obtaining representative subsamples from various waste media received at a laboratory for analysis. Adherence to this guide is critical for ensuring that subsequent analytical results accurately reflect the composition ofā¦
📖 Scope and Significance of D6321 ASTM D6321/D6321M-22, developed under the jurisdiction of Committee D13 on Textiles (Subcommittee D13.61 on Apparel), provides a standardized practice for the evaluation of machine washable T-shirts. This umbrella practice consolidates critical test methods toā¦
🔬 Classification and Grades of Sodium Chloride ASTM D632-12 (Reapproved 2020) provides a comprehensive classification system for sodium chloride intended for deicing and road construction applications. The standard covers materials derived from natural deposits (rock salt) or produced by manā¦
📐 Scope and General Requirements ASTM D6320/D6320M − 24 outlines the standardized test methods for single filament steel wire used to reinforce hose products. Under Subcommittee D13.19, these methods provide a comprehensive framework for determining mechanical properties such as breakingā¦