Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📋 Scope and Classification Framework ASTM D4634-16 (Reapproved 2022), designated as the Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA), provides a uniform framework for specifying S/MA materials. This standard falls under the…
📐 Introduction and Scope of D4632 ASTM D4632/D4632M – 15a (Reapproved 2023), formally titled the Standard Test Method for Grab Breaking Load and Elongation of Geotextiles, serves as a critical index test for the geosynthetics industry. This method provides a…
📐 Scope and Applicability of the Constant Head Injection Test ASTM D4630-19 establishes a standardized field procedure for determining the transmissivity and storage coefficient (storativity) of geological formations exhibiting low-permeability characteristics. Specifically, the method applies to formations with intrinsic permeabilities…
The ASTM D4631-18 standard specifies a rigorous field procedure for determining the transmissivity and storativity of geological formations with very low permeability. Designed specifically for conditions where conventional pumping tests are not feasible, this method utilizes the pressure pulse technique…
ASTM D4628-23 provides a standardized procedure for the quantitative determination of barium, calcium, magnesium, and zinc in unused lubricating oils using atomic absorption spectrometry (AAS). These metals are critical markers of additive packages, including detergents, antioxidants, and antiwear agents, which…
📐 Scope and Specimen Requirements This test method covers the determination of trace total nitrogen in liquid hydrocarbons boiling from approximately 50 °C to 400 °C, with viscosities between 0.2 cSt and 10 cSt (mm²/s) at room temperature. It is applicable to naphthas, distillates,…
🔬 Scope and Principle The ASTM D4627-22 standard, officially titled Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids, establishes a procedure for evaluating the ferrous corrosion control characteristics of these fluids under controlled laboratory conditions. The test…
This test method, designated ASTM D4625-21, provides a standardized procedure for evaluating the inherent storage stability of middle distillate fuels through accelerated aging at 43 °C (110 °F). The method is primarily intended for research applications to predict long-term ambient storage behavior…
📐 Scope and Applicability This standard practice (ASTM D4626‑23, also designated as 378/87) establishes a rigorous procedure for calculating gas chromatographic (GC) response factors. The practice is applicable to chromatographic data derived from gaseous mixtures, liquids at room temperature, or…
🔬 Overview and Scope of ASTM D4623: The USBM Overcoring Method This standard provides the definitive method for determining ambient local stresses—both principal and secondary—within a rock mass. The test is performed using a three-component borehole deformation gauge (BDG) originally…