Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📏 Scope and Applicability of D6376-10 ASTM D6376-10 (Reapproved 2017) defines a standard procedure for the determination of total sulfur and trace metals in raw or calcined petroleum coke via Wavelength Dispersive X-ray Fluorescence (WDXRF) spectroscopy. As specified in Section…
📋 Scope and Significance This test method, D6375-24, covers the determination of the Noack evaporation loss of lubricating oils using a thermogravimetric analyzer (TGA). It is applicable to base stocks and fully formulated lubricants with evaporative losses ranging from 0%…
🛣️ Performance Grade (PG) Classification and Scope ASTM D6373-23 provides a comprehensive specification for asphalt binders graded by performance. Grading designations are explicitly tied to the LTPPBind Online calculated maximum pavement design temperature and the minimum pavement design temperature. This…
📐 Scope and Key Definitions This test method, ASTM D6374-22, specifies the determination of volatile matter produced by pyrolysis when green petroleum coke is subjected to defined conditions. It is an empirical method requiring strict adherence for comparable results. The…
📐 Scope and Referenced Materials ASTM D6372-23 establishes a comprehensive practice for the design, testing, and construction of microsurfacing systems. This standard specifically covers mixtures of polymer-modified asphalt emulsion, mineral aggregate, mineral filler, water, and additives that are properly proportioned,…
📐 Standard Overview and Application ASTM D6370-23, developed by Committee D11, provides a standard test method for compositional analysis of rubber using thermogravimetry (TGA). It is used to determine the amounts of organics (including oil and polymer), carbon black, and…
The Cold Filter Plugging Point (CFPP) test, performed in accordance with ASTM D6371‑24, is a fundamental procedure for assessing the low‑temperature operability of diesel and domestic heating fuels. This standard determines the temperature at which a fuel sample, cooled under…
📐 Scope and Significance of EPDM Flashing Design This guide covers the design of details for typical conditions encountered in new ballasted, mechanically attached, or fully adhered ethylene propylene diene terpolymer (EPDM) sheet roof systems. It assists designers in preparing…
📋 Scope and Composition Requirements This specification (ASTM D6368‑06, Reapproved 2023) establishes the requirements for stabilized normal‑propyl bromide (nPB) solvents used in vapor‑degreasing operations. It also provides a distinct specification for technical‑grade n‑propyl bromide. The standard explicitly requires that any…
🔬 Scope and Method Principle ASTM D6366-99 specifies a standard test method for the determination of total trace nitrogen (organic and inorganic) in liquid aromatic hydrocarbons, their derivatives, and related chemicals. The method utilizes the principle of oxidative combustion followed…