admin

Tip: IEC 61560:1998 specifies requirements for radiation contamination monitoring equipment used to detect radioactive contamination on personnel. It covers whole-body monitors, hand-and-foot monitors, and clothing monitors installed at exits from controlled areas in nuclear facilities. 1. Scope and Classification of…

Tip: IEC 61562:1998 specifies requirements for portable neutron dose rate meters used to measure ambient dose equivalent H*(10) from neutron radiation in the energy range from thermal (0.025 eV) to 15 MeV. These instruments are essential for radiation protection in…

Published by the International Electrotechnical Commission (IEC) | Engineering Technical Article | © 2026 TNLab Overview and Scope IEC 61563 (first edition, 2001-06) is a radiation protection instrumentation standard that specifies requirements for equipment used to measure the specific activity…

Published by the International Electrotechnical Commission (IEC) | Engineering Technical Article | © 2026 TNLab Overview and Scope IEC TR 61566 (first edition, 1997-06) addresses the measurement of human exposure to radio-frequency electromagnetic fields in the frequency range from 100…

Tip: IEC 61554:1999 specifies standard panel cut-out dimensions for electrical measuring instruments and control equipment mounted in industrial switchboards and control panels. It ensures dimensional interchangeability between equipment from different manufacturers. 1. Scope and Importance of Standardization IEC 61554:1999 establishes…

Tip: IEC 61557-12:2007 (with Corrigendum 1:2008) is part of the IEC 61557 series covering safety requirements for measuring and monitoring equipment used to test electrical safety parameters in low-voltage distribution systems up to 1000 V AC and 1500 V DC.…

Tip: IEC 61558-2-16:2009 (with Corrigendum 1:2010) is a particular requirement within the IEC 61558 series, specifically covering the safety of transformers and reactors intended for use in switching mode power supplies (SMPS) with rated voltages up to 1000 V AC…

Tip: IEC 61559-1:1998 defines functional requirements for radiation protection instrumentation systems in nuclear facilities. It covers continuous monitoring of radiation levels, alarm generation, data acquisition, and the integration of multiple monitoring devices into a coherent radiation protection system. 1. Scope…

Tip: IEC 61543 applies to residual current devices (RCDs) with rated voltages not exceeding 440 V a.c. intended for household and similar use. It defines both emission and immunity limits to ensure reliable operation in residential electromagnetic environments. 1. Scope…

Tip: IEC TS 61545:1996 is a Technical Specification that provides guidance on the functional requirements for control systems used in nuclear reactors. It addresses the unique challenges of reactor I&C, including redundancy, diversity, and fail-safe design principles essential for nuclear…