Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
A Blueprint for Intelligent Substation and Switchgear Modernization Introduction and Scope IEC TR 62063:1999, titled “High-voltage switchgear and controlgear – The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear,” is a forward-looking technical report that…
Key Insight: IEC TR 62064 bridges the theoretical gap between two critical shielding metrics — surface transfer impedance (ZT) and screening attenuation (as) — providing essential guidance for RF cable designers and EMC engineers working on coaxial cable performance above…
IEC 62057-1:2023 specifies the requirements for electrical test equipment used to verify the compliance of low-voltage switchgear and controlgear assemblies (LVSCA) with the IEC 61439 series. This is the essential companion standard for test laboratories, switchgear manufacturers, and certification bodies.…
Standard: IEC 62058-11 | Full title: Electricity metering equipment — Acceptance inspection — Part 11: General acceptance inspection methods | Scope: Lot-by-lot acceptance inspection of electricity metering equipment Introduction: Why a Dedicated Acceptance Standard? Electricity metering equipment — including smart…
Foundational dependability concepts for electricity metering equipment covering reliability, availability, maintainability and life cycle management IEC TR 62059-11, published in 2002 as a Technical Report, provides the foundational concepts and general framework for dependability management of electricity metering equipment. This…
A Comprehensive User Guide for Battery Monitoring Systems Introduction to Battery Monitoring IEC TR 62060:2001, titled “Secondary cells and batteries – Monitoring of lead acid stationary batteries – User guide,” is a fundamental technical report that provides comprehensive guidance on…
IEC 62052-11:2020 is the cornerstone standard that defines the general requirements, test conditions, and performance criteria for all alternating current electricity metering equipment. Whether you are designing a smart meter for a utility grid or specifying acceptance tests for a…
IEC 62053-11 defines the particular requirements for newly manufactured electromechanical (induction-type) watt-hour meters used for measuring alternating current active energy. While static (electronic) meters have largely replaced induction meters in new deployments, millions of electromechanical meters remain in service worldwide,…
IEC 62054-11 specifies the particular requirements and type tests for electronic ripple control receivers used in alternating current electricity metering systems. These receivers decode audio-frequency signals (typically 110 Hz to 2000 Hz) superimposed on the power distribution network to execute…
IEC 62055-21 defines the overarching framework for the Standard Transfer Specification (STS), the globally dominant open standard for prepayment (payment) metering systems. This standard establishes the architectural model, functional components, and security mechanisms that enable any STS-compliant vending system to…