Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Understanding Go/No-Go and Error Rate Indicators for Professional Digital Video Tape Recorders IEC 62070:2001, titled “Broadcast digital video tape recorders — Identification method for recording and/or reproduction error status,” is a concise but essential international standard that defines how professional…
6.35 mm Magnetic Tape Format for 25 Mb/s and 50 Mb/s DV-Based Compressed Video Recording IEC 62071-1:2005, part of the IEC 62071 series under the general title “Helical-scan compressed digital video cassette system using 6.35 mm magnetic tape — Format…
An In-Depth Guide to NG Brush Materials, Performance, and Applications per IEC PAS 62072 1. Understanding Natural Graphite Brush Materials IEC PAS 62072 defines the basic characteristics of natural graphite (NG) brushes for commutators and slip-rings in rotating electrical machinery.…
Standardized Methods for Assessing Water Repellency of High-Voltage Insulator Surfaces IEC TS 62073:2016, titled “Guidance on the measurement of hydrophobicity of insulator surfaces,” is a technical specification that provides standardized methods for evaluating the water repellency (hydrophobicity) of high-voltage insulator…
Understanding the operational and performance requirements for ship track control systems per IEC 62065:2014 IEC 62065:2014 defines the minimum operational and performance requirements for shipborne track control systems, aligning with IMO resolution MSC.74(69) Annex 2 and bridge alert management (BAM)…
Understanding surge phenomena, protection strategies, and SPD coordination per IEC TR 62066:2002 IEC TR 62066 catalogs the full spectrum of surge overvoltages in low-voltage AC power systems and provides foundational guidance for surge protection design. 1. Classification of Overvoltages in…
A technical deep dive into IEC 62067:2011 covering type tests, prequalification testing, and installation requirements for EHV cable systems IEC 62067:2011 specifies test methods and requirements for power cables with extruded insulation for rated voltages from 150 kV (Um =…
A technical guide to IEC 62068:2013 – screening tests, endurance testing, and partial discharge evaluation for insulation systems under impulse stress IEC 62068:2013 provides a general test methodology for evaluating the electrical endurance of insulating materials and systems subjected to…
Designing Safe Machines with SIL-Based Performance Requirements Introduction and Scope IEC 62061 is the machinery-sector-specific functional safety standard derived from the generic IEC 61508 framework. Officially titled “Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic…
Improving IEC 60112 Through Multi-Laboratory Testing of Insulating Materials Introduction and Scope IEC TR 62062:2002, titled “Results of the Round Robin series of tests to evaluate proposed amendments to IEC 60112,” documents a comprehensive inter-laboratory investigation into methods for determining…