Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASME SPPE 1B-1992 — Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations (Addenda 1B)
📘 ASME SPPE 1B-1992 is the second Addenda to ASME SPPE-1-1991, Quality Assurance and Certification of Safety and Pollution Prevention Equipment (SPPE) Used in Offshore Oil and Gas Operations. It was issued on April 1, 1992. The first Addenda (SPPE 1A-1991) was published on November 1, 1991. This is a typical maintenance addenda: it makes only a single errata correction to the title of API RP 14B in Appendix I, with no substantive changes to the technical body of the document. It demonstrates how the SPPE series uses a six-month rolling addenda cycle to keep its referenced standards current and accurate.
💡 The margin-note system is important: text from the 1991 edition carries note (91), changes from the first Addenda carry (a), and changes introduced by this second Addenda carry (b) — so the provenance of every revision is identifiable.
1. What This Addenda Changed 📌
Per the Summary of Changes, only page 13 (Appendix I) was replaced:
| Page | Location | Change |
|---|---|---|
| Page 13 | Appendix I (Referenced Standards) | Title of API RP 14B corrected by Errata |
The affected area is flagged with margin note (b); changes from SPPE-1-1991 and the first Addenda carry notes (91) and (a) respectively. No other pages, including the reverse sides, contain changes. Users should retain the Addenda title and copyright pages and all replaced pages for traceability.
2. Appendix I: The Referenced Standards Framework 🔧
Appendix I is the master index of external specifications adopted by SPPE-1. The SPPE-1 Standard (latest edition and addenda) applies to, and is referenced by, the standards listed in this Appendix. Unless otherwise shown, the editions listed, with current supplements, are applicable. After this addenda’s correction, the Appendix I listing is:
| Standard | Title | Edition |
|---|---|---|
| API Spec 14A | Specification for Subsurface Safety Valve Equipment | 7th Edition, January 1988 |
| API RP 14B | Recommended Practice for Design, Installation, Repair and Operation of Subsurface Safety Valve Systems | 3rd Edition, January 1990 |
| API Spec 14D | Specification for Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | 8th Edition, June 1991 |
| API RP 14H | Recommended Practice for Use of Surface Safety Valves and Underwater Safety Valves Offshore | 2nd Edition, April 1984 |
⚠️ Inquiries concerning the referenced standards must be transmitted to the appropriate standards writing group. The referenced API editions, with their current supplements, must remain current and valid.
3. The Role of Referenced Standards in SPPE Certification 🛠️
Within the SPPE certification framework, referenced standards supply the technical criteria: SPPE-1 governs quality assurance and certification management, while the specific technical performance, test requirements, and acceptance criteria for parts/equipment are set by the cited API standards. Appendix I is therefore the bridge between the certification system and the technical specifications.
- 🔍 Test basis: Type tests and acceptance tests of SPPE equipment are performed to the methods and criteria of the referenced standards.
- 🔧 Field repair: Field repairs performed in accordance with API RP 14B and API RP 14H do not require SPPE accreditation — an explicit exemption in Appendix I.
- 📊 Version control: Referenced standard editions are updated progressively via addenda; procurement and engineering documents should reference the latest effective version.
- 📋 Quality traceability: Technical standard versions cited in quality assurance manuals should align with the current Appendix I listing.
🚨 The field-repair exemption applies only to repairs in accordance with API RP 14B and API RP 14H. Manufacturing or repair work outside the scope of these two recommended practices must satisfy SPPE-1 certification requirements.
4. The Value of the SPPE Addenda Maintenance Mechanism 🔍
From 1A and 1B onward, the SPPE series demonstrates a consistent maintenance philosophy: an addenda issue every six months, revisions incorporated directly into the base document as replacement pages, and traceability guaranteed through the Summary of Changes and margin notes. This mechanism provides three benefits:
- Continuing compliance: referenced standard versions are synchronized promptly when new API editions are released, avoiding stale certification bases.
- Controlled cost: holders replace only affected pages instead of purchasing an entire new standard.
- Clear traceability: margin notes (91), (a), (b) make the originating edition of every change evident at a glance.
5. Frequently Asked Questions ❓
❓ Q: What did SPPE 1B-1992 primarily revise?
A: It made a single errata correction to the title of API RP 14B in Appendix I; no substantive changes were made to the technical body.
A: It made a single errata correction to the title of API RP 14B in Appendix I; no substantive changes were made to the technical body.
❓ Q: Why does field repair per API RP 14B not require SPPE accreditation?
A: Appendix I explicitly states that field repairs performed in accordance with API RP 14B and API RP 14H do not require SPPE accreditation, reducing compliance burden for field maintenance; manufacturing and repair activities outside their scope remain subject to certification.
A: Appendix I explicitly states that field repairs performed in accordance with API RP 14B and API RP 14H do not require SPPE accreditation, reducing compliance burden for field maintenance; manufacturing and repair activities outside their scope remain subject to certification.
❓ Q: What does margin note (b) mean?
A: (b) flags changes introduced by the second Addenda (SPPE 1B-1992); (91) marks the 1991 edition text and (a) marks changes from the first Addenda (1A-1991).
A: (b) flags changes introduced by the second Addenda (SPPE 1B-1992); (91) marks the 1991 edition text and (a) marks changes from the first Addenda (1A-1991).
🔍 Q: What if a referenced standard edition becomes outdated?
A: The SPPE series updates Appendix I via six-month addenda cycles; always use the latest effective version after the newest addenda, and direct questions about referenced standards to the appropriate standards writing group.
A: The SPPE series updates Appendix I via six-month addenda cycles; always use the latest effective version after the newest addenda, and direct questions about referenced standards to the appropriate standards writing group.
