Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
BS ISO Standards Single-File Series Overview · Batch 15 — A Compilation of 150 International Standards (ISO) and Their Technical Points
A Compilation of 150 International Standards (ISO) and Their Technical Points
The BS ISO series comprises British National Standards published by the British Standards Institution (BSI) as the UK implementation of International Standards developed by the International Organization for Standardization (ISO). This batch (Batch 15) consists of 150 single-file standards drawn from the BS ISO series, spanning surface chemical analysis, corrosion and protection, fine ceramics (advanced ceramics), biomimetics, space data and information transfer, textiles, tyres and vehicles, water and soil quality, and health informatics.
Most of these standards adopt ISO International Standards identically and cover test methods, product specifications, terminology, safety requirements and design guidelines. The article lists the full standard set in numerical order and expands on five representative standards, helping readers understand the structure, technical requirements and application points of BS ISO single-file standards.
💡 This batch contains 150 single-file BS ISO standards, mainly in surface chemical analysis, corrosion protection, space data and fine ceramics; most are readable text versions, with a small number of scanned versions (explicitly noted in the text).
1. Series Overview 📌
This batch is arranged by standard number from ISO 17947 to ISO 18600 and covers surface chemical analysis (Auger electron spectrometer energy scale calibration, secondary-ion mass spectrometry relative sensitivity factors, XPS/AES quantitative analysis, X-ray induced degradation correction, confocal fluorescence microscope lateral resolution), corrosion and protection (uniform corrosion rate, crevice corrosion, AC corrosion protection criteria, critical crevice temperature, atmospheric corrosion), fine ceramics (silicon nitride powder chemical analysis, photocatalytic antiviral activity, ceramic tube and ring elastic modulus, granule compressive strength), biomimetics (biomimetic materials, structures and components; terminology, concepts and methodology; biomimetic structural optimization), and space data and information transfer systems (mission operations message abstraction layer, lossless multispectral and hyperspectral image compression, PN ranging, space link extension API series).
By standard type, numerous test methods and analysis standards are present together with product specifications, terminology and design guideline standards. The Space Link Extension (SLE) API series forms a complete interface system covering the return all frames, return channel frames, return operational control fields, forward CLTU and forward space packet services; the biomimetics standards systematically define the biomimetics methodology for the first time.
2. Standard List and Technical Points 📋
| Standard | Title |
|---|---|
| BS ISO 17947:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders |
| BS ISO 17949:2013 | Scanned version standard (refer to the official published version) |
| BS ISO 17957:2015 | Photography — Digital cameras — Shading measurements |
| BS ISO 17966:2016 | Assistive products for personal hygiene that support users — Requirements and test methods |
| BS ISO 17973:2016 | Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis |
| BS ISO 17974:2002 | Surface chemical analysis — High-resolution Auger electron spectrometers — Calibration of energy scales for elemental and chemical-state analysis |
| BS ISO 17984:2014 | Machine-made textile floor coverings — Determination of dimensional changes after exposure to heat and/or water |
| BS ISO 17992:2013 | Iron ores — Determination of arsenic content — Hydride generation atomic absorption spectrometric method |
| BS ISO 18054:2004 | Oils of orris rhizome (Iris pallida Lam. or Iris germanica L.) — Determination of irone content — Method using gas chromatography on a polar column |
| BS ISO 18061:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of antiviral activity of semiconducting photocatalytic materials — Test method using bacteriophage Q-beta |
| BS ISO 18063-1:2016 | Rough-terrain trucks — Visibility — Test methods and their verification — Part 1: Variable-reach trucks |
| BS ISO 18065:2015 | Tourism and related services — Tourist services for public use provided by Natural Protected Areas Authorities — Requirements |
| BS ISO 18066:2015 | Textiles — Manmade filament yarns — Determination of shrinkage in boiling water |
| BS ISO 18067:2015 | Textiles — Synthetic filament yarns — Determination of shrinkage in dry-hot air (after treatment) |
| BS ISO 18068:2014 | Cotton fibres — Test method for sugar content — Spectrophotometry |
| BS ISO 18069:2015 | Corrosion of metals and alloys — Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids |
| BS ISO 18070:2015 | Corrosion of metals and alloys — Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel |
| BS ISO 18071:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of antiviral activity of semiconducting photocatalytic materials under indoor lighting environment — Test method using bacteriophage Q-beta |
| BS ISO 18073:2004 | Water quality — Determination of tetra- to octa-chlorinated dioxins and furans — Method using isotope-dilution HRGC/HRMS |
| BS ISO 18074:2015 | Textiles — Identification of some animal fibres by DNA analysis method — Cashmere, wool, yak and their blends |
| BS ISO 18084:2011 | Press tools for tablets — Punches and dies |
| BS ISO 18086:2015 | Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria |
| BS ISO 18089:2015 | Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control |
| BS ISO 18096:2013 | Thermal insulating products for building equipment and industrial installations — Determination of maximum service temperature for preformed pipe insulation |
| BS ISO 18097:2013 | Thermal insulating products for building equipment and industrial installations — Determination of maximum service temperature |
| BS ISO 18098:2013 | Thermal insulating products for building equipment and industrial installations — Determination of the apparent density of preformed pipe insulation |
| BS ISO 18099:2013 | Thermal insulating products for building equipment and industrial installations — Determination of the coefficient of thermal expansion |
| BS ISO 18106:2016 | Passenger car, commercial vehicle, truck and bus tyres — Methods for measuring snow grip performance — Loaded new tyres |
| BS ISO 18114:2003 | Surface chemical analysis — Secondary-ion mass spectrometry — Determination of relative sensitivity factors from ion-implanted reference materials |
| BS ISO 18116:2005 | Surface chemical analysis — Guidelines for preparation and mounting of specimens |
| BS ISO 18117:2009 | Surface chemical analysis — Handling of specimens prior to analysis |
| BS ISO 18118:2015 | Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials |
| BS ISO 18129:2015 | Condition monitoring and diagnostics of machines — Approaches for performance diagnosis |
| BS ISO 18137:2015 | Leaf springs — Technical specifications |
| BS ISO 18139:2017 | Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements |
| BS ISO 18142:2014 | Carbonaceous materials for the production of primary aluminium — Baked carbon bodies — Determination of the dynamic elasticity modulus by the resonance method |
| BS ISO 18144:2003 | Environmental tobacco smoke — Estimation of its contribution to respirable suspended particles — Method |
| BS ISO 18145:2003 | Environmental tobacco smoke — Determination of vapour phase nicotine and 3-ethenylpyridine |
| BS ISO 18154:2017 | Ships and marine technology — Safety valve for cargo tanks of LNG carriers — Design and testing requirements |
| BS ISO 18158:2016 | Workplace air — Terminology |
| BS ISO 18163:2016 | Clothing — Digital fittings — Vocabulary and terminology used for the virtual garment |
| BS ISO 18164:2005 | Passenger car, truck, bus and motorcycle tyres — Methods of measuring rolling resistance |
| BS ISO 18165:2001 | Petroleum and natural gas industries — Performance testing of cementing float equipment |
| BS ISO 18168:2015 | Textile floor coverings — Colour fastness to shampooing |
| BS ISO 18184:2014 | Textiles — Determination of antiviral activity of textile products |
| BS ISO 18185-3:2015 | Freight containers — Electronic seals — Part 3: Environmental characteristics |
| BS ISO 18186:2011 | Freight containers — RFID cargo shipment tag system |
| BS ISO 18187:2016 | Soil quality — Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis |
| BS ISO 18188:2016 | Specification of polypropylene drinking straws |
| BS ISO 18189:2016 | Ophthalmic optics — Contact lenses and contact lens care products — Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/solution interactions |
| BS ISO 18190:2016 | Anaesthetic and respiratory equipment — General requirements for airways and related equipment |
| BS ISO 18191:2015 | Water quality — Determination of pHt in sea water — Method using the indicator dye m-cresol purple |
| BS ISO 18197:2015 | Space systems — Space based services requirements for centimetre class positioning |
| BS ISO 18201:2013 | Scanned version standard (refer to the official published version) |
| BS ISO 18202:2015 | Space data and information transfer systems — Mission operations message abstraction layer |
| BS ISO 18203:2016 | Steel — Determination of the thickness of surface-hardened layers |
| BS ISO 18211:2016 | Non-destructive testing — Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation |
| BS ISO 18215:2015 | Ships and marine technology — Vessel machinery operations in polar waters — Guidelines |
| BS ISO 18221:2016 | Microscopes — Microscopes with digital imaging displays — Information provided to the user regarding imaging performance |
| BS ISO 18225:2012 | Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems |
| BS ISO 18227:2014 | Soil quality — Determination of elemental composition by X-ray fluorescence |
| BS ISO 18238:2015 | Space systems — Closed loop problem solving management |
| BS ISO 18241:2016 | Cardiovascular implants and extracorporeal systems — Cardiopulmonary bypass systems — Venous bubble traps |
| BS ISO 18242:2016 | Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps |
| BS ISO 18249:2015 | Non-destructive testing — Acoustic emission testing — Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers |
| BS ISO 18251-1:2017 | Non-destructive testing — Infrared thermography — Part 1: Characteristics of system and equipment |
| BS ISO 18252:2006 | Scanned version standard (refer to the official published version) |
| BS ISO 18257:2016 | Space systems — Semiconductor integrated circuits for space applications — Design requirements |
| BS ISO 18259:2014 | Ophthalmic optics — Contact lens care products — Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms |
| BS ISO 18264:2016 | Textile slings — Lifting slings for general purpose lifting operations made from fibre ropes — High modulus polyethylene (HMPE) |
| BS ISO 18280:2010 | Scanned version standard (refer to the official published version) |
| BS ISO 18283:2006 | Hard coal and coke — Manual sampling |
| BS ISO 18289:2014 | Ships and marine technology — Navigation and shallow-water engineering vessels — Anchor winches |
| BS ISO 18292:2011 | Energy performance of fenestration systems for residential buildings — Calculation procedure |
| BS ISO 18296:2014 | Ships and marine technology — Ship-shifting winches |
| BS ISO 18300:2016 | Electrically propelled vehicles — Test specifications for lithium-ion battery systems combined with lead acid battery or capacitor |
| BS ISO 18301:2014 | Animal and vegetable fats and oils — Determination of conventional mass per volume (litre weight in air) — Oscillating U-tube method |
| BS ISO 18308:2011 | Health informatics — Requirements for an electronic health record architecture |
| BS ISO 18309:2014 | Ships and marine technology — Incinerator sizing and selection — Guidelines |
| BS ISO 18311:2016 | Soil quality — Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms — Bait-lamina test |
| BS ISO 18321:2015 | Essential oils — Determination of peroxide value |
| BS ISO 18325:2015 | Geosynthetics — Test method for the determination of water discharge capacity for prefabricated vertical drains |
| BS ISO 18333:2014 | Pallets for materials handling — Quality of new wooden components for flat pallets |
| BS ISO 18334:2010 | Pallets for materials handling — Quality of assembly of new wooden pallets |
| BS ISO 18337:2015 | Surface chemical analysis — Surface characterization — Measurement of the lateral resolution of a confocal fluorescence microscope |
| BS ISO 18338:2015 | Metallic materials — Torsion test at ambient temperature |
| BS ISO 18352:2009 | Carbon-fibre-reinforced plastics — Determination of compression-after-impact properties at ambient temperature |
| BS ISO 18362:2016 | Manufacture of cell-based health care products — Control of microbial risks during processing |
| BS ISO 18363-1:2015 | Animal and vegetable fats and oils — Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS — Part 1: Method using fast alkaline transesterification and measurement for 3-MCPD and differential measurement for glycidol |
| BS ISO 18375:2016 | Heavy commercial vehicles and buses — Test method for yaw stability — Sine with dwell test |
| BS ISO 18381:2013 | Space data and information transfer systems — Lossless multispectral and hyperspectral image compression |
| BS ISO 18382:2013 | Scanned version standard (refer to the official published version) |
| BS ISO 18383:2015 | Photography — Digital cameras — Specification guideline |
| BS ISO 18385:2016 | Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes — Requirements |
| BS ISO 18388:2016 | Technical product documentation (TPD) — Relief grooves — Types and dimensioning |
| BS ISO 18404:2015 | Quantitative methods in process improvement — Six Sigma — Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation |
| BS ISO 18413:2015 | Hydraulic fluid power — Cleanliness of components — Inspection document and principles related to contaminant extraction and analysis, and data reporting |
| BS ISO 18417:2017 | Iodine charcoal sorbents for nuclear facilities — Method for defining sorption capacity index |
| BS ISO 18421:2016 | Ships and marine technology — Inland navigation vessels — Lifebuoy housings |
| BS ISO 18422:2014 | Ships and marine technology — Inland navigation vessels — Plate with instructions for rescue, resuscitation and first aid for drowning persons |
| BS ISO 18423:2015 | Space data and information transfer systems — Pseudo-Noise (PN) Ranging Systems |
| BS ISO 18424:2013 | Scanned version standard (refer to the official published version) |
| BS ISO 18425:2013 | Scanned version standard (refer to the official published version) |
| BS ISO 18426:2013 | Scanned version standard (refer to the official published version) |
| BS ISO 18427:2013 | Scanned version standard (refer to the official published version) |
| BS ISO 18428:2013 | Scanned version standard (refer to the official published version) |
| BS ISO 18434-1:2008 | Condition monitoring and diagnostics of machines — Thermography — Part 1: General procedures |
| BS ISO 18438:2013 | Scanned version standard (refer to the official published version) |
| BS ISO 18439:2013 | Scanned version standard (refer to the official published version) |
| BS ISO 18440:2016 | Space data and information transfer systems — Space link extension — Internet protocol for transfer services |
| BS ISO 18441:2016 | Space data and information transfer systems — Space link extension — Application program interface for transfer services — Core specification |
| BS ISO 18442:2016 | Space data and information transfer systems — Space link extension — Application program interface for return all frames service |
| BS ISO 18443:2016 | Space data and information transfer systems — Space link extension — Application program interface for return channel frames service |
| BS ISO 18444:2016 | Space data and information transfer systems — Space link extension — Application program interface for return operational control fields service |
| BS ISO 18445:2016 | Space data and information transfer systems — Space link extension — Application program interface for the forward CLTU service |
| BS ISO 18446:2016 | Space data and information transfer systems — Space link extension — Application program interface for the forward space packet service |
| BS ISO 18457:2016 | Biomimetics — Biomimetic materials, structures and components |
| BS ISO 18458:2015 | Biomimetics — Terminology, concepts and methodology |
| BS ISO 18459:2015 | Biomimetics — Biomimetic structural optimization |
| BS ISO 18461:2016 | Library and publishing statistics — International library statistics |
| BS ISO 18466:2016 | Stationary source emissions — Determination of the biogenic fraction in CO2 in stack gas using the balance method |
| BS ISO 18471:2015 | Agricultural irrigation equipment — Filters — Verification of filtration grade |
| BS ISO 18488:2015 | Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method |
| BS ISO 18489:2015 | Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method |
| BS ISO 18495-1:2016 | Intelligent transport systems — Commercial freight — Automotive visibility in the distribution supply chain — Part 1: Architecture and data definitions |
| BS ISO 18512:2007 | Soil quality — Guidance on long and short term storage of soil samples |
| BS ISO 18515:2014 | Carbonaceous materials for the production of aluminium — Cathode blocks and baked anodes — Determination of compressive strength |
| BS ISO 18516:2006 | Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Determination of lateral resolution, analysis area, and sample area affected by analysis |
| BS ISO 18517:2015 | Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide |
| BS ISO 18522:2016 | Paper and board — Automated off-line testing of physical properties for CD (cross direction) profiles |
| BS ISO 18523-1:2016 | Energy performance of buildings — Schedule and condition of building, zone and space usage for energy calculation — Part 1: Non-residential buildings |
| BS ISO 18535:2016 | Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method |
| BS ISO 18537:2015 | Traceability of crustacean products — Specifications on the information to be recorded in captured crustacean distribution chains |
| BS ISO 18538:2015 | Traceability of molluscan products — Specifications on the information to be recorded in farmed molluscan distribution chains |
| BS ISO 18539:2015 | Traceability of molluscan products — Specifications on the information to be recorded in captured molluscan distribution chains |
| BS ISO 18550:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Testing method for macro-heterogeneity in microstructure |
| BS ISO 18553:2002 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| BS ISO 18554:2016 | Surface chemical analysis — Electron spectroscopies — Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy |
| BS ISO 18558:2015 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of ceramic tube and rings |
| BS ISO 18560-1:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment |
| BS ISO 18564:2016 | Machinery for forestry — Noise test code |
| BS ISO 18565:2015 | Document management — AFP/Archive |
| BS ISO 18573:2012 | Conveyor belts — Test atmospheres and conditioning periods |
| BS ISO 18580:2015 | Motorcycles — Verification of total running resistance force during mode running on a chassis dynamometer |
| BS ISO 18582-1:2016 | Fluid power — Specification of reference dictionary — Part 1: General overview on organization and structure |
| BS ISO 18587:2017 | Scanned version standard (refer to the official published version) |
| BS ISO 18591:2015 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of compressive strength of ceramic granules |
| BS ISO 18596:2015 | Test method for staple length of dehaired cashmere — Hand-arranging method |
| BS ISO 18599:2015 | Textile machinery and accessories — Strips for water jet solidification |
| BS ISO 18600:2015 | Textile machinery and accessories — Web roller cards — Terms and definitions |
3. Key Technical Requirements 🔧
For surface chemical analysis, ISO 17973/17974 specify medium/high-resolution Auger spectrometer energy scale calibration, ISO 18114 specifies relative sensitivity factor determination from ion-implanted reference materials, ISO 18118 specifies quantitative analysis using relative sensitivity factors, ISO 18516 specifies lateral resolution and analysis area determination, and ISO 18554 specifies identification and correction of X-ray induced degradation in XPS, forming the basis of quantitative surface analysis.
For corrosion and protection, ISO 18069 specifies uniform corrosion rate determination of stainless steels and nickel-based alloys, ISO 18070 specifies disc-spring crevice corrosion formers, ISO 18086 specifies AC corrosion protection criteria, and ISO 18089 specifies critical crevice temperature under potentiostatic control, used for corrosion evaluation of buried and cathodically protected pipelines.
For fine ceramics, ISO 17947 specifies silicon nitride powder chemical analysis, ISO 18061/18071 specify antiviral activity of photocatalytic materials, ISO 18558 specifies elastic modulus and bending strength of ceramic tubes and rings, ISO 18591 specifies granule compressive strength, and ISO 18560-1 specifies air purification performance by the test chamber method.
For space data and information transfer systems, ISO 18202 specifies the mission operations message abstraction layer, ISO 18381 specifies lossless multispectral and hyperspectral image compression, ISO 18423 specifies PN ranging systems, and ISO 18440-18446 specify the Space Link Extension (SLE) transfer service and five service API specifications.
⚠️ Where specific numerical values are required, consult the corresponding standard directly; some standards in this batch are older and may have been revised or superseded — verify the current version before use.
4. Technical Interpretation of Representative Standards 🔍
BS ISO 18118:2015 — Quantitative Analysis Using Relative Sensitivity Factors
Scope: specifies the method for quantitative analysis of homogeneous materials by Auger electron spectroscopy and X-ray photoelectron spectroscopy using experimentally determined relative sensitivity factors (RSF).
Points: specifies the definition and determination of RSF, matrix effect considerations, analysis area and energy window selection, and uncertainty handling of quantitative results. This standard is the international basis for semiquantitative AES/XPS analysis.
BS ISO 18458:2015 — Biomimetics Terminology, Concepts and Methodology
Scope: specifies terminology, concepts and a methodology framework for biomimetics.
Points: defines core concepts such as biomimetics, bioinspiration and the biological-to-engineering transfer process, specifies the transfer methodology and evaluation criteria from biological principles to engineering application, providing a common language for systematic research and engineering application of biomimetics.
BS ISO 18308:2011 — Electronic Health Record (EHR) Architecture Requirements
Scope: specifies requirements for electronic health record architectures.
Points: specifies clinical content, structure, semantics, interfaces, security and interoperability requirements of the EHR, providing architecture-level constraints for EHR system design and interoperability; this is an important foundation standard in health informatics.
BS ISO 18164:2005 — Tyre Rolling Resistance Measurement
Scope: specifies methods for measuring the rolling resistance of passenger car, truck, bus and motorcycle tyres.
Points: specifies test conditions of the force method (force wheel rim) including inflation pressure, load, speed and temperature, data acquisition and rolling resistance coefficient calculation procedures. Rolling resistance is a key indicator for tyre energy saving and low-carbon evaluation.
BS ISO 18535:2016 — Friction and Wear of Diamond-like Carbon Films
Scope: specifies determination of friction and wear characteristics of diamond-like carbon (DLC) films by the ball-on-disc method.
Points: specifies test rig configuration, normal load, sliding speed, environmental control, and friction coefficient and wear rate calculation procedures. DLC films are widely used as friction-reducing and wear-resistant coatings for engine components, tools and discs.
5. Engineering Practice and Applications 🛠️
Materials testing institutions should carry out quantitative surface analysis in accordance with ISO 17973/17974/18114/18118/18516/18554 and corrosion performance evaluation in accordance with ISO 18069/18070/18086/18089.
Advanced ceramic enterprises should carry out powder chemical analysis and photocatalytic and mechanical property tests in accordance with ISO 17947/18061/18071/18558/18560/18591.
Space organisations should implement ground-spacecraft link and service interface management in accordance with ISO 18202/18381/18423/18440-18446.
Textile and tyre enterprises should carry out yarn, fibre, colour fastness and antiviral performance inspection in accordance with ISO 18066/18067/18068/18074/18168/18184 and tyre tests in accordance with ISO 18106/18164.
✅ Applying this batch of standards comprehensively enables a complete technical system from surface analysis and corrosion evaluation to fine ceramics and space data, improving testing capability and product quality.
6. Frequently Asked Questions ❓
What standard types are covered in this batch?
This batch of 150 standards are BS ISO single-file International Standards covering surface chemical analysis, corrosion and protection, fine ceramics, biomimetics, space data and information transfer, textiles, tyres and vehicles, water and soil quality, and health informatics.
This batch of 150 standards are BS ISO single-file International Standards covering surface chemical analysis, corrosion and protection, fine ceramics, biomimetics, space data and information transfer, textiles, tyres and vehicles, water and soil quality, and health informatics.
How are scanned versions handled?
This batch contains 1 explicit scanned version (BS ISO 18252) and several items whose body text cannot be directly extracted; these are summarised by their field knowledge and explicitly noted in the text, with specific clauses per the BSI official published version.
This batch contains 1 explicit scanned version (BS ISO 18252) and several items whose body text cannot be directly extracted; these are summarised by their field knowledge and explicitly noted in the text, with specific clauses per the BSI official published version.
What points do space data and information transfer standards focus on?
Space data standards focus on mission operations messages, multispectral/hyperspectral image compression, PN ranging and Space Link Extension (SLE) service APIs, forming the standard interface system for space-ground link data services.
Space data standards focus on mission operations messages, multispectral/hyperspectral image compression, PN ranging and Space Link Extension (SLE) service APIs, forming the standard interface system for space-ground link data services.
How is surface chemical analysis organised?
Surface chemical analysis is organised separately by technique (AES, XPS, SIMS) and subject (energy calibration, quantification, depth profiling, sample handling), standardising instrument calibration and analysis procedures.
Surface chemical analysis is organised separately by technique (AES, XPS, SIMS) and subject (energy calibration, quantification, depth profiling, sample handling), standardising instrument calibration and analysis procedures.
How can the original standards be obtained?
All standards are based on the official published version of the British Standards Institution (BSI) and can be purchased through the BSI standards store or authorised channels.
All standards are based on the official published version of the British Standards Institution (BSI) and can be purchased through the BSI standards store or authorised channels.
⚠️ This batch includes 1 scanned version standard whose body text cannot be directly extracted; the relevant standard is summarised by field knowledge and the specific clauses are per the BSI official published version.