📐 Test Scope and Terminology This standard (D5365-23) specifies a method for determining the long-term ring-bending strain (Sb) of fiberglass pipe, including glass-fiber-reinforced thermosetting resin pipe (RTRP) and glass-fiber-reinforced polymer mortar pipe (RPMP). The test values are reported in inch-pound…

📐 Scope and Terminology for D5366-23 ASTM D5366-23, developed by Subcommittee D22.11 on Meteorology, specifies a wind tunnel test method for measuring a wind vane’s starting threshold (Uo), delay distance (D), and overshoot ratio (Ω). The standard defines Uo as…

This guide provides comprehensive technical direction for the design, material selection, fabrication, erection, inspection, and quality assurance of fiberglass reinforced plastic (FRP) chimney liners used in coal-fired utility units. Established to meet stringent environmental regulations, these liners operate in challenging…

🎯 Scope and Application The D5362 – 13 (Reapproved 2018) test method is the standard procedure for determining the snagging resistance of fabrics using a Bean Bag apparatus. This method is specifically designed and validated for woven and knitted fabrics…

📜 Scope and Classification System ASTM D5363-16 (Reapproved 2024) is the definitive standard specifying requirements for single-component anaerobic adhesives used for locking, sealing, and retaining threaded or cylindrical assemblies. These adhesives cure to a solid state when confined between closely…

The ASTM D5361/D5361M-16 standard practice provides a comprehensive guide for sampling compacted asphalt mixtures from existing pavements. This procedure ensures that samples are obtained with minimal distortion, allowing for accurate laboratory testing of key properties. The standard emphasizes the use…

ASTM D5359-98 (Reapproved 2021) provides a comprehensive specification for glass cullet recovered from municipal waste streams, intended specifically for the production of insulation-type glass fiber. The standard establishes critical benchmarks for chemical composition, color mix, contaminant levels, and particle size…

📐 Scope, Methodology, and Unit Requirements ASTM D5360/D5360M −23, formally designated as the Standard Practice for Design and Construction of Asphalt Surface Treatments, serves as a comprehensive guide for engineers and contractors. Per Section 1.1, this practice specifically covers the…

📋 Scope and Significance This standard practice (D5358-93, Reapproved 2024) describes the procedure and equipment for taking surface samples of water or other liquids using a dipper. The dipper, with an optional extension handle, enables sampling of streams, ponds, waste…

🔬 Principle of the Relative Crystallinity Test ASTM D5357-19 describes a standardized procedure for measuring the relative crystallinity of Zeolite Sodium A (NaA) using X-ray powder diffraction (XRD). The method involves obtaining diffraction patterns from the sample and a reference…

🧪 Overview, Scope, and Key Definitions ASTM D5355-95 (Reapproved 2021) establishes a standard gravimetric procedure for measuring the specific gravity of oils and liquid fats. This test method is primarily utilized for quality control of softening agents employed in the…

📐 Test Method Overview and Scope ASTM D5356-24 establishes the definitive procedure for determining the pH of chrome tanning solutions. Fundamental to the leather tanning industry, this test method outlines the specific steps for diluting chrome tanning liquor to a…

🔬 Scope and Significance ASTM D5354-95 (Reapproved 2020) provides a standard test method for determining the total active ingredients in sulfonated and sulfated oils. The procedure extracts undecomposed sulfonated/sulfated fat and other fatty matter over an acidified concentrated salt solution,…

📌 Scope and Referenced Documents ASTM D5353-95 (Reapproved 2019) is a standard test method for the determination of total desulfated fatty matter in sulfated oils. The method is derived from Sections 29 through 32 of Test Methods D500. It achieves…

🔬 Apparatus and Reagent Specifications The test method mandates a specific apparatus for the accurate extraction and boiling of samples. The setup requires a 300 mL borosilicate glass Erlenmeyer flask with a glass stopper connected to an air condenser via…

📜 Standard Scope and Significance ASTM D5352-95 (Reapproved 2019) describes a test method for determining organically combined sulfuric anhydride in sulfonated or sulfated oils. The method involves extracting the undecomposed sulfonated or sulfated fat over an acidulated, concentrated salt solution…

📘 Scope and Significance ASTM D5350 −95 (Reapproved 2019) describes the determination of organically combined sulfuric anhydride in sulfated oils. The method involves boiling the sample with sulfuric acid and titrating the reaction mixture. It is derived from Test Methods…