Published: May 16, 2026 | Category: Maritime Navigation | Standard: IEC 62376:2010 IEC 62376 specifies the operational and performance requirements, methods of testing, and required test results for Electronic Chart Systems (ECS) used in maritime navigation. An ECS is a…

Specifications, calibration methods, and engineering practice for sound intensity measurement instrumentation IEC TS 62370, published in 2017, is a Technical Specification that specifies requirements for instruments used in the measurement of sound intensity. Sound intensity measurement is a powerful acoustic…

Published: May 16, 2026 | Category: HV Insulators | Standard: IEC TS 62371:2008 IEC TS 62371 is a Technical Specification that defines the dimensional and mechanical characteristics of hollow pressurised and unpressurised ceramic and glass insulators used in electrical equipment…

Published: May 16, 2026 | Category: Nuclear Instrumentation | Standard: IEC 62372:2006 IEC 62372 is an international standard that defines standardised measurement methods for determining the light output and intrinsic resolution of housed scintillators used in nuclear instrumentation. Scintillation detectors…

Published: May 16, 2026 | Category: Semiconductor Reliability | Standard: IEC 62373:2006 IEC 62373 defines the standardised bias-temperature (BT) stability test method for MOSFET devices, which is one of the most critical reliability tests in semiconductor manufacturing. The BT test…

💡 Standard Snapshot: IEC TS 62367 (Technical Specification, 2004) addresses the safety aspects of xDSL (Digital Subscriber Line) signals on circuits connected to telecommunication networks. It defines voltage and current limits, evaluates the crest factor and peak-to-average ratio of DSL…

💡 Standard Snapshot: IEC 62368-3 (Edition 1.0, 2017) addresses the safety aspects of DC power transfer through communication cables in audio/video, information and communication technology (ICT) equipment. It is part of the IEC 62368 series which has replaced IEC 60950…

Standardized framework for assessing electromagnetic field exposure from EAS, RFID, and similar short range devices — covering measurement, modelling, and compliance evaluation Introduction to EMF Exposure Evaluation for Short Range Devices Short range devices (SRDs) such as electronic article surveillance…

💡 Standard Snapshot: IEC 62364 (Edition 1.0, 2013) provides a comprehensive guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines. It covers erosion mechanisms, prediction methodologies, material selection, design considerations, and maintenance strategies for hydropower plants operating…

💡 Standard Snapshot: IEC 62365 (Edition 2.0, 2009) specifies the method for transmitting digital audio signals over Asynchronous Transfer Mode (ATM) networks. It defines how to pack digital audio samples into ATM cells, establish switched virtual circuits for audio connections,…

💡 Standard Snapshot: IEC 62366-1 (Edition 1.0, 2015, with Corrigendum 1:2016) specifies the usability engineering process for medical devices. It establishes a framework for analyzing, designing, testing, and validating the user interface of medical devices to minimize use errors and…

Ferrite cores are manufactured through a powder metallurgy process involving pressing and sintering at temperatures above 1200°C. Despite advances in process control, the manufacturing process inevitably produces cores with minor surface irregularities—chips, cracks, flash, and porosity. The critical engineering question…

The smart grid vision promises seamless data exchange between utility control centers, substations, field devices, and market participants. Yet the reality is that two fundamentally different information models govern these domains: the Common Information Model (CIM), used in energy management…

When a power electronics engineer specifies a ferrite core for a transformer or inductor design, the choice involves far more than just the core shape and size. The engineer must define material grade, initial permeability, saturation flux density, core loss…

💡 Standard Snapshot: IEC 62363 (Edition 1.0, 2008) specifies requirements for portable photon contamination meters and monitors used for detecting and measuring surface contamination from gamma-emitting and X-ray-emitting radionuclides. It covers instruments used in nuclear facilities, medical settings, and radiation…

Modern power grids are among the most complex cyber-physical systems ever built. They integrate generation plants spanning megawatts to kilowatts, transmission networks crossing continents, distribution grids reaching individual homes, and an ever-growing fleet of distributed energy resources (DERs). Each subsystem…

Every power electronics engineer knows that the turns count of a transformer or inductor is determined by the core’s ability to store magnetic energy. But how do you guarantee that a core from Manufacturer A will produce the same inductance…