IEC 62614 is the international standard published in July 2010 by IEC Technical Committee 86 (Fibre optics) that defines launch condition requirements for measuring multimode fibre attenuation. This standard replaces the earlier IEC/PAS 62614:2009 and introduces the standardized concept of…

IEC 62615 is the international standard published in May 2010 by IEC Technical Committee 47 (Semiconductor devices) that defines the transmission line pulse (TLP) test method for electrostatic discharge (ESD) sensitivity characterization at the component level. Based on ANSI/ESD STM5.5.1-2008,…

IEC 62616 is the international standard first published in 2010 by IEC Technical Committee 80 (Maritime navigation and radiocommunication equipment and systems) that specifies the performance requirements, functional characteristics, and test methods for Bridge Navigational Watch Alarm Systems (BNWAS). A…

IEC TR 62617 is a Technical Report published by the International Electrotechnical Commission that provides systematic guidance on evaluating and reporting measurement uncertainty for the energy performance testing of home laundry appliances tested in accordance with IEC 60456. The second…

IEC 62610-4 is the international standard that defines cooling performance test methods for water supplied heat exchangers installed in electronic cabinets built to the IEC 60297 (19-inch) and IEC 60917 series dimensions. Published in August 2013 by IEC Technical Committee…

IEC/PAS 62611 is a Publicly Available Specification (PAS) published by the International Electrotechnical Commission in 2009, addressing the performance measurement methods for commercial vacuum cleaners. Unlike standards designed for household appliances, this specification covers the unique requirements of commercial-grade cleaning…

IEC 62612 is the international standard that defines performance requirements for self-ballasted LED lamps used in general lighting services with supply voltages above 50V. First published in 2013 and subsequently amended by AMD1:2015 and AMD2:2018, the consolidated edition IEC 62612:2018…

IEC 62613-1 is the international standard published in 2011 by IEC Technical Committee 23 (Electrical Accessories) that establishes general requirements for plugs, socket-outlets, and ship couplers used in High-Voltage Shore Connection (HVSC) Systems. These systems enable ships berthed at ports…

✅ Standard at a Glance IEC 62605, developed by IEC TC 100 (Audio, video and multimedia systems and equipment), defines the interchange format for e-dictionaries in multimedia e-publishing and e-books. The standard specifies the data model for dictionary content, metadata,…

✅ Standard at a Glance IEC 62606 is the international standard for Arc Fault Detection Devices (AFDD), specifying general requirements and test methods for devices that detect arc faults in low-voltage electrical installations and automatically disconnect the circuit to prevent…

✅ Standard at a Glance IEC TS 62607-4-6 is Part 4-6 of the IEC 62607 series focusing on key control characteristics for nano-enabled electrical energy storage devices. This technical specification defines a standardized test method for determining the carbon content…

✅ Standard at a Glance IEC 62608-1 is Part 1 of the IEC 62608 series defining the basic reference model for configuring devices on multimedia home networks. This part specifies the system model and configuration architecture for devices connected to…

✅ Standard at a Glance IEC 62601 defines the WIA-PA (Wireless Networks for Industrial Automation – Process Automation) communication network and communication profiles. Published in 2015, this international standard specifies the system architecture, protocol stack, and communication mechanisms for wireless…

✅ Standard at a Glance IEC TR 62602 is a technical report that provides standardized nominal cross-sectional areas, wire counts and sizes, and maximum resistance values for insulated cable conductors in AWG (American Wire Gauge) and KCMIL (thousand circular mils)…

✅ Standard at a Glance IEC TS 62603-1 is a Technical Specification that provides a comprehensive framework and methodology for evaluating industrial Process Control Systems (PCS). Developed by IEC TC 65 (Industrial-process measurement, control and automation), this standard details the…

✅ Standard at a Glance IEC 62604-2 is Part 2 of the series on Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers of assessed quality, providing practical guidelines for duplexer selection, application, and system integration. Prepared by IEC…

IEC TS 62597 (Edition 1.0, 2011-10) is a Technical Specification that provides standardized procedures and conditions for measuring magnetic field levels generated by electronic and electrical apparatus in the railway environment, specifically with respect to human exposure assessment. As railway…