A comprehensive technical guide to vibration emission testing of fastener driving tools (nailers, staplers) according to ISO 28927-13 Introduction to ISO 28927-13 ISO 28927-13:2022 is the most recent addition to the ISO 28927 series, specifying laboratory test methods for measuring…

Environmental meteorology — Wind velocity measurement using pulsed Doppler lidar | Atmospheric sensing guide Introduction to ISO 28902-2 ISO 28902-2:2017 specifies requirements for ground-based remote sensing of wind using heterodyne pulsed Doppler lidar. Developed by ISO/TC 146/SC 5, this standard…

Environmental meteorology — Wind profiling using CW Doppler lidar technology | Atmospheric sensing guide Introduction to ISO 28902-3 ISO 28902-3:2018 specifies requirements for ground-based remote sensing of wind using continuous-wave (CW) Doppler lidar. Developed by ISO/TC 146/SC 5, this standard…

Design, manufacturing and production testing of cryogenic and low-temperature service valves | Valve engineering guide Introduction to ISO 28921-1 ISO 28921-1:2022 specifies requirements for design, material selection, manufacturing, and production testing of isolating valves for low-temperature applications. This second edition…

A comprehensive technical guide to type testing requirements for cryogenic isolating valves according to ISO 28921-2 Introduction to ISO 28921-2 and Its Importance ISO 28921-2:2015 specifies type testing requirements for isolating valves intended for low-temperature applications, particularly in cryogenic service…

Safety requirements and protective measures for EDM equipment and systems | Machine safety engineering guide Introduction to ISO 28881 ISO 28881:2022 specifies safety requirements for electrical discharge machines (EDM), including die-sinking EDM, wire EDM, and EDM drilling machines. This second…

Laboratory screening method for evaluating dental hard tissue erosion from mouthwashes | Dental materials guide Introduction to ISO 28888 ISO 28888:2013 specifies a laboratory screening method for evaluating the erosion potential of non-fluoridated oral rinses on dental hard tissues (enamel…

Environment-friendly burial methods for livestock carcass disposal during disease outbreaks | Environmental engineering guide Introduction to ISO 28901 ISO 28901:2011 provides guidance on environment-friendly burial methods for animal carcasses to prevent epidemics. Developed by ISO/TC 190/SC 7, this standard addresses…

Environmental meteorology — Determination of meteorological visual range using backscatter lidar | Atmospheric sensing guide Introduction to ISO 28902-1 ISO 28902-1:2012 specifies requirements for ground-based remote sensing of visual range using lidar (light detection and ranging) technology. Developed by ISO/TC…

Guidelines for evaluating and retrofitting existing concrete structures in seismic zones | Structural engineering guide Introduction to ISO 28841 ISO 28841:2013 provides simplified procedures for seismic assessment and rehabilitation of existing concrete buildings. Developed by ISO/TC 71/SC 7, this standard…

Guidelines for structural design, load analysis and construction of RC bridges | Civil engineering guide Introduction to ISO 28842 ISO 28842:2013 provides simplified design guidelines for reinforced concrete bridges, covering the full range from conceptual design through detailed structural engineering.…

Requirements and testing procedures for non-reclosable child-resistant packaging | Packaging engineering guide Introduction to ISO 28862 ISO 28862:2018 specifies requirements and test methods for non-reclosable child-resistant packaging for non-pharmaceutical products. Adopted from EN 862 under the ISO fast-track procedure, this…

Standardised laboratory test methods for verifying the performance of needle-based injection systems ISO 28821:2012 specifies the test methods for verifying the performance of needle-based injection systems defined in ISO 28820. It provides standardised measurement procedures for dose accuracy, injection force,…

Unified requirements and test methods for needle-based injection systems — The current state of the art ISO 28822:2018 consolidates and updates the requirements from ISO 28820 and test methods from ISO 28821 into a single cohesive standard for needle-based injection…

Requirements and test methods for needle-free liquid jet injection medical devices ISO 28823:2018 specifies the requirements and test methods for needle-free jet injectors — devices that deliver liquid medication through the skin using a high-velocity jet without the use of…

Requirements and test methods for sterile single-use infusion sets for liquid pharmaceutical preparations ISO 28824:2016 specifies requirements and test methods for sterile, single-use infusion sets intended for the administration of liquid pharmaceutical preparations to patients. This standard covers the complete…

Acceptance sampling indexed by producer’s risk quality (PRQ) and consumer’s risk quality (CRQ) | Quality engineering guide Introduction to ISO 28801 ISO 28801:2011 provides double sampling plans by attributes with minimal sample sizes, indexed by producer’s risk quality (PRQ) and…