The SAE J3018 standard provides essential safety-relevant guidance for on-road testing of prototype Automated Driving System (ADS)-operated vehicles. It focuses on the training of In-Vehicle Fallback Test Drivers (IFTDs) and the safe operation of test vehicles in mixed traffic environments.…

SAE J1650 defines requirements for seamless copper-nickel 90-10 (C70600) tubing used in surface vehicle applications. Originally issued in 1993, the standard has been stabilized as of December 2011 due to market maturity and limited technical oversight. This article provides an…

Designing seat belt systems for heavy trucks and multipurpose passenger vehicles (over 10,000 lb GVWR) requires more than just meeting crash protection standards. Occupants spend long hours in these vehicles, so comfort, fit, and convenience are critical. SAE J1834-2022 provides…

Purpose and Scope The SAE J765-2017 standard provides a uniform test code for determining the maximum safe load capacity of revolving cranes that rely on stability against overturning. It is applicable to all such cranes, including mobile and crawler cranes,…

SAE J674-2013 is a Surface Vehicle Recommended Practice that provides guidance on safety glazing materials for motor vehicles and motor vehicle equipment. Although cancelled in September 2013 because its technical requirements were fully duplicated by SAE J673, this standard remains…

SAE J997, Spark Arrester Test Carbon, is a surface vehicle standard that defines the requirements for a reference test carbon used in evaluating spark arrester performance. Developed by the SAE Spark Arrester Standards Committee and stabilized by the IC Powertrain…

In the automotive collision repair industry, restoring a vehicle’s structural integrity demands precision and reliability. Squeeze-type resistance spot welding (STRSW) has become a cornerstone technique, enabling repair technicians to replicate original factory welds closely. To ensure consistency and safety, SAE…

The SAE J1855-2024 standard provides a uniform procedure for the safe deployment of electrically activated automotive airbags in end-of-life vehicles during the scrappage and reclamation process. This recommended practice is designed to be accessible to automobile dismantlers and shredders without…

SAE J993-2018 defines the numerical and temper designation systems for aluminum and aluminum alloys used in wrought and cast forms. This stabilized standard reflects mature technology and remains vital for consistent material specification in engineering applications. Designation Systems for Wrought…

Backup alarms are critical safety devices on off-road work machines, providing audible warnings during reverse operation. SAE J994-2014 establishes consistent laboratory test methods to verify the performance, durability, and environmental resilience of electrically operated backup alarms used on construction and…

The SAE J986 standard, originally issued in 1967 and cancelled in August 2018, provided a recommended practice for measuring the exterior sound levels of passenger cars, multipurpose vehicles, and light trucks with a gross vehicle mass rating (GVMR) of 4540…

The SAE J990 standard, originally issued in 1967 and recently stabilized in 2020, provides a consistent naming framework for major components and parts of agricultural and industrial mowers. Covering rotary, flail, and sickle bar types, this standard is essential for…

Understanding the Scope and Purpose of SAE J992 SAE J992 defined baseline performance requirements for brake systems of motor vehicles intended for roadway use. Vehicles fell into three classifications: light trucks and buses (6001–10 000 lb GVW), trucks and buses (over 10 000 lb…

SAE J971, officially titled ‘Brake Power Rating Test Code—Commercial Vehicle Inertia Dynamometer,’ is a recommended practice that outlines a standardized method for evaluating the energy absorption and dissipation capacity of brakes used in highway commercial vehicles over 4.5 T (10,000…

SAE J983-1998 defines the arrangement of basic hand and foot controls for mobile construction-type cranes and cable excavators. This recommended practice standardizes control layouts across six common applications—crane, hoe, shovel, dragline, pile driver, and clamshell—to improve operator safety, reduce confusion,…

🛠️ This SAE Recommended Practice defines a consistent test procedure for determining passenger car tire revolutions per mile. The method supplements SAE J678 and ensures repeatable results across different tires and vehicles. Below we break down the essential requirements and…

Ensuring consistent and repeatable results in the testing, calibration, and flushing of diesel fuel injection equipment demands a highly specific fluid. For decades, SAE J967 provided the benchmark for these requirements. In December 2015, the standard was officially cancelled and…