ASTM D2287-19, formally titled “Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds,” establishes a framework for classifying materials where the resin portion contains at least 90% vinyl chloride. The remaining…

📐 Test Conditions and Specimen Preparation This test method, designated D2288-97 (Reapproved 2001), covers the determination of relative volatility of plasticizers or volatile contaminants at elevated temperatures. The text references notes and footnotes that provide explanatory material but are not…

🧪 Scope, Significance, and Summary of the Test ASTM D2284-11 (Reapproved 2019) establishes a standardized procedure for determining the concentration of acidic fluorides in sulfur hexafluoride (SF₆). This test is vital for assessing gas quality in high-voltage electrical insulation systems…

ASTM D2285-99 specifies a rapid, field-oriented procedure for measuring the interfacial tension of electrical insulating oils of petroleum origin against water using the drop-weight method. This test method provides a reliable indication of the presence of hydrophilic compounds in new…

📐 Overview and Scope of the Skein Test ASTM D2281-10, the Standard Test Method for the Evaluation of Wetting Agents by the Skein Test, establishes a controlled procedure for determining the efficiency of ordinary commercial wetting agents. As defined in…

📐 Scope and Application of ASTM D2282-99 ASTM D2282-99 specifies requirements for acrylonitrile-butadiene-styrene (ABS) plastic pipe produced by single or simultaneous multiple coextrusion. These pipes are manufactured using standard thermoplastic pipe dimension ratios (SDR) and are pressure rated for water…

ASTM D2283 – 86 (Reapproved 1997) provides the definitive specification for askarels—synthetic, fire-resistant chlorinated aromatic hydrocarbon liquids used as insulating and cooling media in liquid-filled transformers. This standard is essential for guiding both the management of legacy PCB-containing fluids and…

📐 Specimen Geometry and Test Configurations This standard defines a rigorous methodology for determining the relative effectiveness of wood preservatives in round posts set in the ground. It distinguishes between two primary test configurations based on post diameter and research…

ASTM D228/D228M-21 is the definitive standard for evaluating the quality, durability, and composition of asphalt-based steep roofing materials, including roll roofing, cap sheets, and shingles. Covering everything from initial field sampling to detailed chemical analysis, this standard provides a consistent…

ASTM D2275-22 determines the voltage endurance of solid electrical insulating materials under surface corona at commercial power frequencies. This test method is designed for comparative evaluation of materials subjected to prolonged AC stress (Scope 1.1). Values are stated in SI…

🛢️ Overview of ASTM D2276-22 and Its Key Components ASTM D2276-22 defines the standard test method for determining particulate contaminant in aviation turbine fuel using a field monitor. The standard provides a gravimetric method for quantitative analysis and a color…

📐 Method Overview and Significance ASTM D2273-08 (Reapproved 2016) establishes a standardized procedure for determining trace levels of sediment in lubricating oils. This test method is specifically designed for sediment concentrations less than 0.05% by volume and is critical for…

📐 Scope and Test Applicability This test method, designated D2274-14 (Reapproved 2019), covers the measurement of the inherent stability of middle distillate petroleum fuels under specified oxidizing conditions at 95°C. It is primarily intended for fuels such as gas oil,…

🔬 Overview and Significance of ASTM D2271 ASTM D2271-94 (Reapproved 1999) provides a standardized constant volume high-pressure vane pump test procedure for the preliminary examination of hydraulic fluid wear characteristics. This test is an essential indicator of how well a…

The ASTM D2272-22 standard outlines the Rotating Pressure Vessel Oxidation Test (RPVOT), a critical method for assessing the oxidation stability of steam turbine oils. By utilizing an oxygen-pressured vessel in the presence of water and a copper catalyst at 150…

📋 Scope and Summary ASTM D2269-10 (Reapproved 2020) specifies a standard test method for the evaluation of National Formulary (NF) and United States Pharmacopeia (USP) grade white mineral oils using ultraviolet absorption spectroscopy. These highly refined oils are critical in…

🏗️ Materials and Manufacture ASTM D227/D227M defines the specific requirements for coal-tar saturated organic felt intended for use in built-up roofing (BUR) and waterproofing systems. The manufacturing process requires that a single thickness of dry felt be saturated with refined…