ASTM D4078-02 (Reapproved 2021) provides a comprehensive specification for water-emulsion floor polishes designed for use on nonwood flooring surfaces and sealed-wood floors. The standard establishes critical physical, chemical, and performance requirements, ensuring consistent quality, durability, and safety across formulations intended…

ASTM D4075-06 (Reapproved 2021) provides standardized test methods for determining metal content in rubber compounding materials using flame atomic absorption spectroscopy (AAS). This standard is essential for process control, product acceptance, and research and development in the rubber manufacturing industry.…

ASTM D4077-23 defines the comprehensive specification for cumene (isopropylbenzene), a critical chemical intermediate primarily used in the production of phenol and acetone. This standard establishes precise purity requirements and impurity limits under the jurisdiction of Committee D16 on Aromatic, Industrial,…

⚖️ Scope, Significance, and Test Methodology This test method, designated D4073/D4073M −06 (Reapproved 2024), provides a standardized procedure for determining the tensile-tear strength of bituminous roofing membranes. The test involves measuring the maximum load required to fail notched specimens of…

📋 Test Scope and Significance This test method, designated ASTM D4074/D4074M-11 (Reapproved 2022), covers the determination of the bitumen content of adhered aggregate surfacing on a roof, as well as the approximate mass per unit area of the flood coat…

📐 Scope and Test Summary ASTM D4072-23 defines the empirical procedure for determining the Toluene-Insoluble (TI) content in tar and pitch. The scope explicitly notes that strict adherence to all procedural details is mandatory due to the empirical nature of…

🔍 Standard Scope and Composition The ASTM D4070-15 (Reapproved 2022) standard specifies an adhesive lubricant used for facilitating the insertion and positioning of preformed elastomeric bridge compression seals in concrete or steel-faced joints. The lubricant bonds the seal to joint…

ASTM D4071-23 provides a structured guide for the specification, application, and use of water barrier membrane systems on Portland cement concrete bridge decks. Designed to protect structures from the damaging effects of deicing salts, this standard covers liquid applied, preformed,…

ASTM D4069-95 (Reapproved 2020) provides the standard specification for virgin impregnated activated carbon used to remove gaseous radio-iodine species from gas streams. The values stated in SI units are regarded as standard, and the specification is under the jurisdiction of…

📐 Purpose and Scope of the D4067-23 Standard ASTM D4067-23 establishes a classification system for reinforced and filled poly(phenylene sulfide) (PPS) materials used in injection molding and extrusion. It provides a standardized line call-out system using ASTM test methods, ensuring…

ASTM D4068-17 (Reapproved 2022), an American National Standard, provides the definitive specification for flexible chlorinated polyethylene (CPE) sheeting. This material is specifically engineered for use as a concealed water-containment membrane in high-stakes construction environments such as fountains, pools, planter boxes,…

📐 Scope and Applicable Materials ASTM D4065-20 establishes a standardized practice for collecting and reporting dynamic mechanical properties of plastics. This practice is designed to characterize the viscoelastic behavior of materials by measuring their response to oscillatory deformations across a…

📐 Scope and Application ASTM D4066-13 (Reapproved 2019), formally titled “Standard Classification System for Nylon Injection and Extrusion Materials (PA),” establishes a uniform taxonomy for specifying polyamide (nylon) materials in manufacturing. While the standard covers compositions suitable for injection molding,…

📋 Scope and Applicable Species This practice covers the full-length preservative treatment of utility poles by the thermal process. It applies specifically to poles made from the following species: 🟦 Species 📏 Scientific Name Douglas fir Pseudotsuga menziesii Lodgepole pine…

🧪 Scope, Terminology, and Significance ASTM D4062-24 defines a laboratory test method for determining the relative leveling of water- and solvent-reducible architectural paints in white and light tints. The method compares the ridges produced in a draw-down film to a…

🧪 Classification and Scope of ASTM D4063 ASTM D4063 – 99 (Reapproved 2022) defines the requirements for pressboard used for electrical insulating purposes. This specification encompasses boards manufactured from kraft pulp, cotton pulp, or a combination of both. The material…

ASTM D4060-19 is the primary standard for evaluating the resistance of organic coatings to abrasive wear using a Taber Abraser. This test method is essential for quality control, material specification, and comparative analysis of coating durability on rigid surfaces such…