Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE Standards Interpretation
SAE J2245 provides a standardized methodology for assessing the splash and spray produced by road vehicles, with a specific focus on heavy trucks and buses. First issued in 1994 and stabilized in 2011, this document serves as a key reference…
The SAE J2230-2020 standard provides a rigorous method for simulating extreme environmental conditions inside a vehicle—sunlight, heat, and humidity—to predict the performance of automotive interior trim materials. This outdoor, behind-glass apparatus tracks the sun, controls temperature around the clock, and…
SAE J2238 is a recommended practice that establishes a uniform ballistic tank test procedure for evaluating inflator assemblies used in inflatable restraint systems. The standard, revised in 2012, provides guidelines for equipment, test execution, data acquisition, and analysis to ensure…
The SAE J2244-3 standard (issued 1996, cancelled 2007) defined dimensions, performance requirements, and test procedures for light-duty (L series) stud ends with ISO 261 metric threads and O-ring sealing. Although formally superseded by ISO 6149-3, it remains widely referenced for…
The SAE J2223-3 standard, officially titled “Connections for On-Board Road Vehicle Electrical Wiring Harnesses – Part 3: Multipole Connectors – Flat Blade Terminals – Dimensional Characteristics and Specific Requirements,” defines the critical dimensional specifications for multipole connectors used in automotive…
SAE J2226, now cancelled, specifies the essential dimensional features of Type B barrel faced steel rectangular piston rings for internal combustion engines. This standard covers rings up to 200 mm diameter and 4.5 mm width, including fully faced and inlaid…
Overview and Purpose of SAE J2229 SAE J2229 specifies operating procedures for exposing automotive interior trim materials to outdoor sunlight behind glass in a temperature-controlled apparatus. The method was designed to simulate the extreme environmental conditions inside a vehicle—combining sunlight,…
Published by SAE International, SAE J2222 establishes minimum performance and endurance requirements for coiled electrical cables used to connect trucks, trailers, and dollies in 12 VDC nominal systems. The standard references SAE J2394 (Type F-Flexing cable) and SAE J560 connectors,…
SAE J2223-1-2011 defines the dimensional characteristics and specific requirements for single-pole connectors with flat blade terminals in on-board road vehicle electrical wiring harnesses. Stabilized in 2011 to reflect mature technology, this standard remains a key reference for legacy automotive electrical…
Overview of SAE J2213 Standard SAE J2213, last stabilized in October 2012, defines general technology, products, and processes for metric ball joints used in automotive steering and suspension systems. The standard covers dimensional specifications, materials, and performance considerations. As a…
In heavy-duty vehicle manufacturing, the ability to customize electronic components at the assembly line is critical. The SAE J2214 standard, Vehicle Electronic Programming Stations (VEPS) System Specification for Programming Components at OEM Assembly Plants, provides a structured framework for this…
SAE J222 is the key standard for parking lamps (front position lamps) on vehicles less than 2032 mm in overall width. It defines test procedures, performance requirements, and installation guidelines to ensure these lamps provide clear indication of vehicle presence…