Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE Standards Interpretation
SAE J739, originally issued in 1951 and cancelled in August 2007, defines dimensions and hole placement for curved cutting edge sections used on graders. Although superseded by ISO 7129, this standard remains a valuable reference for legacy equipment, conversions, and…
🛠️ The SAE J687 standard, originally issued in 1948 and canceled in 1998, remains a cornerstone reference for vehicle classification in the commercial transportation industry. It provides precise nomenclature for trucks, buses, trailers, and their essential components, ensuring clear communication…
The SAE J691 - Motor Truck CA Dimensions standard has served the automotive and trucking industries for decades, providing a consistent method for measuring the cab-to-axle (CA) dimension—a critical reference for specifying wheelbase, body positioning, and overall vehicle layout. Originally issued in…
SAE J636-2019 defines the standard dimensions, tolerances, and measurement practices for automotive V‑belts and the pulleys they run on. Although serpentine belt drives have become prevalent, V‑belts remain common in many markets, making this standard essential for engineers designing or…
For engineers maintaining or manufacturing heavy-duty braking systems, precise geometric specifications are the bedrock of safety and performance. SAE J662-2011, officially stabilized by the SAE Truck and Bus Foundation Brake Committee, provides the definitive standard for the chamfer dimensions and…
In mining and construction, accurate bucket ratings are critical for equipment selection, productivity estimation, and operational efficiency. SAE J67-2014, a stabilized standard first issued in 1972, provides a uniform method for rating the volumetric capacity of shovel dippers, clam buckets,…
SAE J615 has served as a key reference for engine mounting dimensions in the automotive and industrial sectors. Originally issued in 1919, it defined critical dimensions and tolerances for arm type and side pad mountings, enabling interchangeability across different engine…
When designing or selecting flywheels for industrial engines that must interface with specific power take-offs (PTOs), overcenter clutches, marine gears, or single bearing generators, engineers often turn to SAE J620—a long‑standing SAE standard first issued in 1953 and officially stabilized…
The SAE J563-2009 standard is the key reference for designing, testing, and verifying 12V cigarette lighters, power outlets, and accessory plugs in automotive applications. This revision incorporates expanded dimensional and performance requirements to accommodate current usage patterns, and it now…
SAE J565-2010 defines performance requirements and test procedures for semiautomatic headlamp beam switching devices. These systems automatically switch between high and low beams based on light detected from oncoming or preceding vehicles, reducing glare and improving night-driving safety. The 2010…
SAE J590-1999 defines the test conditions, procedures, and minimum design requirements for turn signal flashers in 6V, 12V, and 24V systems. This standard is crucial for engineers designing automotive lighting systems, ensuring reliability and compliance with regulations like FMVSS 108.…
Overview and Scope SAE J551-13-2009 specifies Bulk Current Injection (BCI) test methods and procedures for evaluating the electromagnetic immunity of electronic components in passenger cars and commercial vehicles. The standard addresses continuous narrowband electromagnetic disturbances within the frequency range of…