Category SAE Standards

SAE J858a is a recommended practice that defines general requirements for blade-type electrical terminals used in surface vehicle electrical systems. Stabilized in 2012, this standard remains a foundational reference for designers and engineers working with quick disconnect terminals. This article…

This article provides an overview of SAE J860, the standard test method for determining the mass per unit area (gram per square meter) of organic materials used in automotive interior trimming. The 2022 reaffirmation refined conditioning tolerances to better align…

SAE J856-1999, titled ‘Connectors and Plugs,’ is a dimensional standard that defined the interface requirements for electrical connectors used in automotive lighting systems, particularly headlamps. Although cancelled in January 1999, this standard provides a historical foundation for understanding connector interchangeability…

The SAE J858 recommended practice defines the requirements for blade-type electrical terminals used in surface vehicle applications. This standard covers terminals for terminating wire ends or for terminating circuits on devices. It specifies temper conditions, attachment methods, and the need…

Front cornering lamps provide crucial additional illumination when turning, enhancing safety for both the driver and other road users. SAE J852-2017, the latest revision of this long-standing recommended practice, sets forth the test procedures, performance requirements, and design guidelines for…

This article examines SAE J853, the 2009 Surface Vehicle Standard that provided engineering requirements for the design, installation, and durability of Vehicle Identification Numbers (VIN) on passenger cars and trucks. Although cancelled and superseded by the federal regulation 49 CFR…

SAE J855, reaffirmed in 2022, provides a standardized procedure for evaluating the elastic and recovery properties of textiles and flexible plastics under a low-static load. This test method is essential for assessing material behavior in applications such as automotive seating,…

SAE J849 has been a cornerstone for designing truck and bus towing systems that handle multiple trailers. First issued in 1963, this Recommended Practice was stabilized in 2013 because the technology for connection and accessory locations has matured and is…

SAE J851‑2011 is a stabilized recommended practice that establishes the critical dimensions for wheels designed for demountable rims, demountable rims themselves, and rim spacers (spacer bands) used in truck and bus applications. These dimensions are essential for maintaining serviceability and…

Accurately communicating the specifications of fluid conductors and connectors without relying on drawings has always been a challenge in engineering. The SAE J846-2023 Recommended Practice addresses this need by providing a standardized, flexible coding system for identifying tube, pipe, and…