Category SAE Standards

SAE J881, reaffirmed in 2021, specifies the minimum dimensional relationships for sheaves, drums, and wire rope used in mobile construction-type lift cranes. Adhering to these guidelines is essential for maintaining safe and efficient crane operations. Minimum Ratio Requirements for Sheaves…

SAE J2909‑2018 establishes a consistent methodology for measuring straight‑line stopping distance on dry and wet asphalt for light vehicles under 4 536 kg GVWR. The 2018 revision adds wet‑surface procedures, addressing a critical gap in earlier versions. This guide distills the standard’s…

Leakage testing is a vital nondestructive testing (NDT) discipline used to detect, locate, and quantify leaks in containers and systems. As documented in SAE J1267-2018, this information report provides foundational knowledge for engineers to determine whether leakage testing suits their…

SAE J743 was a long-standing standard that defined a uniform method for calculating and testing the lift capacity of pipelayers and sideboom equipment. Although cancelled in 2011 and replaced by the international standard ISO 8813, its legacy remains foundational for…

SAE J2518-2019 provides a uniform method for calculating the lift capacity of scrap and material handlers with a 360-degree rotating upper structure. This standard is essential for manufacturers and engineers to ensure consistent, safe load ratings across different machine configurations,…

Standard Overview and Classification SAE J19 (cancelled August 2005) provides a common specification for dipped goods and coatings manufactured from compounded latex for automotive applications such as boots, coated clips, sponge parts, and fabrics. The standard defines two types of…

SAE J987 provides a systematic, nondestructive procedure for evaluating the structural integrity of pendant-supported and luffing jib type lattice boom cranes using resistance strain gages. By simulating maximum service loading conditions under static loads, engineers can measure actual stresses, classify…

SAE J510‑2016 provides concise specifications for leaf springs manufactured in customary U.S. units. It defines bar sizes, tolerances, surface‑decarburization limits, and spring‑type definitions, promoting a clear understanding between spring maker and spring user. The standard references SAE HS‑J788 (Manual on…

Electric cooling fan (ECF) assemblies are vital for maintaining engine temperatures in light-duty vehicles. SAE J2867-2024 establishes a standardized laboratory test method for evaluating the airflow performance of these assemblies. By measuring fan output (airflow, pressure) and input (voltage, current),…

Lane departure warning (LDW) systems are a critical active safety feature designed to alert drivers when their vehicle unintentionally drifts out of its lane. The SAE J2808 information report provides comprehensive guidance on the human-machine interface (HMI) for these systems,…