Category SAE Standards

The offshore environment imposes unique challenges for lift cranes mounted on fixed platforms. SAE J1238:2024 provides a standardized approach for determining dynamic loads, calculation procedures, and load rating charts specifically for cranes lifting loads from vessels alongside in various sea…

The offshore environment presents unique challenges for crane operations, where vessel motions and sea conditions directly impact lifting safety and capacity. SAE J1366-2024, “Rating Lift Cranes Operating on Platforms in the Ocean Environment,” provides a standardized framework for calculating dynamic…

Radiated emissions (RE) testing is a cornerstone of automotive EMC compliance, but the traditional method of simply comparing measured emissions against a limit line has significant shortcomings. SAE J2556-2014 addresses these limitations by introducing a Power Spectral Density (PSD) analysis…

The automotive and marine industries rely on clear standards to ensure electromagnetic compatibility. SAE J551-2-2006 provided test limits and methods of measurement for radio disturbance characteristics from vehicles, motorboats, and spark-ignited engine-driven devices. Although cancelled in 2006 and replaced by…

When performing vehicle sound level measurements according to SAE recommended practices, the instrumentation must meet the Type 1 or Type 2 requirements defined in ANSI S1.4-1983. SAE J184-2014 provides a clear procedure for qualifying a sound data acquisition system (SDAS) to demonstrate electro‑acoustical performance…

The SAE J2888-2025 standard defines essential requirements for fittings, couplers, and hoses used in service equipment for R-1234yf mobile air-conditioning systems. This recommended practice ensures that service hoses for charging, recovery, and recycling equipment are designed with unique connectors to…

🛠️ SAE J2842-2019 establishes a comprehensive testing and certification framework for evaporators used in mobile air conditioning (MAC) systems with refrigerants R-1234yf or R744. The standard focuses on minimizing potential risks to persons during normal use or service, ensuring evaporators…

SAE J2604-2021 provides a standardized test procedure for qualifying powered gas/brake control systems. This recommended practice ensures that these assistive devices meet essential safety and performance criteria. In this guide, we outline the critical aspects of the standard, including testing…

SAE J2051-2005 establishes the minimum performance, operation, and physical requirements for four-way subbase mounted directional air-control valves used in automotive manufacturing. The standard covers spool, poppet, and sliding disc valve types, designed for pressures from vacuum to 1034 kPa (150…

Structural foams play a critical role in modern vehicle design, enhancing noise, vibration, and harshness (NVH) characteristics, reducing weight, and improving structural integrity. In collision repair, matching the original foam strength and cavity fill is essential to restore OEM performance.…