Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE Standards Interpretation
Understanding how a tire behaves under steady state conditions is critical to vehicle handling, safety, and performance. SAE J1107-2012, a stabilized information report from SAE International, provides a standardized framework for laboratory testing machines and procedures used to measure the…
Overview of the Standard SAE J1109 is a surface vehicle standard that defines the names of major components and parts particular to articulated rubber-tired log skidders. Originally issued in 1975 and stabilized in 2019, the standard provides a common nomenclature…
SAE J1110, now cancelled and superseded by J/ISO 13861, remains a foundational standard for specification definitions of articulated rubber-tired log skidders. The standard provides uniform methods for defining key dimensions, angles, masses, and clearances to ensure consistency among manufacturers and…
Engineers involved in automotive wheel attachment systems rely on SAE J1102 for consistent mechanical and material requirements for wheel bolts. This surface vehicle standard has been stabilized, indicating that the technology is mature and the SAE Fasteners Committee will no…
The accurate measurement of force and moment properties is fundamental to understanding tire behavior and vehicle dynamics. SAE J1106, a long-standing recommended practice stabilized in 2012, establishes the requirements for laboratory testing machines used to capture these steady-state characteristics in…
The SAE J1100 standard is the authoritative reference for defining and measuring motor vehicle dimensions. The November 2009 revision represents a comprehensive update that harmonizes definitions with international frameworks such as the Global Car Manufacturers Information Exchange (GCIE) and ISO,…
This article provides an overview of SAE J1101, the standard test procedure for evaluating the parking stability of two-wheel motorcycles equipped with side stands or center stands. Understanding this standard is essential for engineers designing parking stand systems and for…
SAE J1102M-2016 defines the mechanical and material requirements for metric wheel bolts used in automotive vehicles. This surface vehicle standard covers strength grades, thread dimensions, torque recommendations, and corrosion protection for these critical fasteners. Although now stabilized, it remains a…
The SAE J1092 standard, published by SAE International, provided a consistent naming system for major components of general purpose wheel industrial tractors. Initially issued in 1974, the standard was cancelled in May 2003 due to limited demand. Despite its cancellation,…
The SAE J1093-2020 standard provides an analytical framework to evaluate the structural competence of wire rope–supported, latticed boom systems on mobile construction cranes. This procedure complements physical testing per SAE J987 and helps engineers determine safe load ratings, assess elastic…
This article summarizes the key elements of the cancelled SAE J110-2002 standard, which provided recommended practices for testing radial lip type seals used in rotating shaft applications across automotive and off-highway equipment. Although superseded, the standard established essential equipment and…
⚠️ Important: SAE J1088 was officially cancelled in March 2013 and should not be used for regulatory compliance. Background and Cancellation SAE J1088 was a recommended practice that provided a test procedure for measuring gaseous exhaust emissions from small utility…