Category ISO Standards

Methodologies for Assessing and Mitigating Risks from Uncontrolled and Controlled Re-Entry Events Introduction to Re-entry Risk Management ISO 27875:2019 establishes a framework for managing risks associated with the re-entry of unmanned spacecraft and launch vehicle orbital stages. The standard addresses…

Standard Methods for Accurate Calibration of Condensation Particle Counters Introduction to CPC Calibration ISO 27891:2015 establishes standardized procedures for calibrating condensation particle counters (CPCs) used to measure aerosol particle number concentration. CPCs are fundamental instruments in aerosol science, capable of…

Standardized Test Methods for Evaluating Emergency Stop Torque in High-Vacuum Pump Systems Overview of Rapid Shutdown Torque Measurement ISO 27892:2010 specifies the method for measuring the rapid shutdown torque of turbomolecular pumps — a critical safety parameter that determines mechanical…

Standard processes for cleaning non-ferrous metal surfaces prior to coating, including aluminium, copper, titanium, and magnesium alloys Introduction to ISO 27831-2 ISO 27831-2:2008 specifies cleaning and preparation processes for non-ferrous metals and alloys, including aluminium, copper, nickel, titanium, magnesium, zinc,…

Test Procedures and Performance Requirements for Agricultural and Forestry Machinery Safety Introduction to ISO 27850 and FOPS Requirements ISO 27850:2013 specifies test procedures and performance requirements for Falling Object Protective Structures (FOPS) mounted on tractors for agriculture and forestry. This…

Methodologies for Predicting Spacecraft Orbital Decay and Re-Entry Timeline Overview of Orbit Lifetime Estimation ISO 27852:2024 provides standardized methodologies for estimating the orbital lifetime of spacecraft and debris objects in low Earth orbit (LEO). Accurate orbit lifetime prediction is essential…

Analytical Methods for Protein and Nitrogen Characterization in Dairy Products Introduction to Nitrogenous Fraction Analysis in Cheese ISO 27871:2011 (IDF 224:2011) specifies methods for the determination of nitrogenous fractions in cheese and processed cheese products. This standard is essential for…

Information security controls for health organizations based on ISO/IEC 27002 with healthcare-specific extensions Introduction to ISO 27799:2025 ISO 27799:2025 provides health-sector-specific guidance on information security controls, building upon the framework established in ISO/IEC 27002:2022. This third edition cancels and replaces…

Standardized format for designating electrodeposited, autocatalytic, and vapour-deposited metallic coatings Introduction to ISO 27830 ISO 27830:2017 establishes a standardized format for designating metallic and other inorganic coatings, covering electrodeposited, autocatalytic (electroless), and vapour-deposited coatings. This second edition replaces ISO 27830:2008…

Standard processes for cleaning ferrous metal surfaces prior to coating, including degreasing, descaling, pickling, and de-rusting Introduction to ISO 27831-1 ISO 27831-1:2008 specifies processes for cleaning the surfaces of ferrous metals and alloys — non-corrosion-resisting steels, cast irons, pure irons,…