Category ISO Standards

Assessment of environments by physical measurements and subjective responses of people | Ergonomics engineering guide Introduction to ISO 28802 ISO 28802:2012 provides a comprehensive framework for assessing physical environments through combined physical measurements and subjective human response surveys. Developed by…

Application of International Standards to persons with disabilities, older people and vulnerable groups | Inclusive design guide Introduction to ISO 28803 ISO 28803:2012 extends the application of physical environment ergonomics standards to people with special requirements — including older adults,…

Foundational terminology, classification, and general safety requirements for needle-based medical injection systems ISO 28820:2009 establishes the foundational terminology, classification, and general safety requirements for needle-based injection systems used in medical practice. It serves as the root document for the ISO…

Comprehensive guide to mechanical, thermal and chemical testing of vitreous enamel coatings 1. Scope and Significance of ISO 28764 ISO 28764 specifies the testing methods for vitreous enamel coatings applied to metal substrates. Vitreous enamel, also known as porcelain enamel,…

Standardised methods for evaluating the thermal endurance of vitreous enamel coatings under rapid temperature changes 1. Understanding Thermal Shock in Vitreous Enamel Thermal shock is one of the most demanding failure modes for vitreous enamel coatings. When an enamelled article…

Petroleum and natural gas industries — Drilling and production equipment | Engineering technical guide Introduction to ISO 28781 ISO 28781:2010 specifies requirements and guidelines for subsurface barrier valves and related equipment used in the petroleum and natural gas industries. These…

Standardized methodologies for assessing surface durability of glass-ceramic coatings Introduction to ISO 28723 ISO 28723 specifies test methods for determining the scratch hardness of vitreous enamel coatings. Vitreous enamel — a glass-ceramic coating fused to metal substrates at high temperatures…

Global standard for spark plug performance, dimensions, and durability requirements Introduction to ISO 28741 ISO 28741 is the international standard governing spark plugs for internal combustion engines. It defines dimensional specifications, performance requirements, test methods, and marking conventions for spark…

Quality requirements and test methods for enameled low-carbon steel products Introduction to ISO 28762 ISO 28762 is the international standard that specifies requirements for vitreous enamel coatings applied to low-carbon steel substrates. Low-carbon steel (typically with carbon content below 0.08%)…

Standard methods for evaluating surface friction and safety of enameled products Introduction to ISO 28763 ISO 28763 specifies test methods for determining the slip resistance of vitreous enamel surfaces. Slip resistance — the frictional characteristic of a surface that resists…