Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Interoperability is the holy grail of industrial automation. With dozens of fieldbus protocols, hundreds of device types, and thousands of manufacturers worldwide, ensuring that devices from different vendors can seamlessly exchange data and work together is a monumental engineering challenge.…
Standardising performance, testing and application classification of supercapacitors for industrial and consumer electronics IEC 62391 is the primary international standard for electric double-layer capacitors (EDLCs), commonly known as supercapacitors or ultracapacitors. Unlike conventional electrolytic capacitors that store charge dielectrically, EDLCs…
DALI protocol specifications, bus power requirements, control commands, and engineering design insights for fluorescent lamp control gear IEC 62386-201, part of the extensive IEC 62386 series of standards, specifies the digital addressable lighting interface (DALI) protocol specifically for control gear…
Standardising measurement performance for TLD, OSL, and RPL passive dosimetry in personal and environmental monitoring IEC 62387 is the international benchmark for passive integrating dosimetry systems used in radiation protection. It applies to dosemeters that measure external photon and beta…
The definitive performance standard for shipborne radar equipment meeting IMO SOLAS requirements IEC 62388 is the core international standard governing shipborne radar systems used for maritime navigation. It defines the minimum operational and performance requirements for radar equipment installed on…
🔍 Overview of IEC 62382 Loop Check Standard IEC 62382 is the international standard that defines the procedures and requirements for electrical and instrumentation (E&I) loop checks in the process industry. Published in its second edition in 2012, the standard…
🔍 Scope and Importance of Magnetic Loss Determination IEC TR 62383, published in 2006 as a Technical Report, addresses the critical challenge of determining magnetic losses in electrical steel and magnetic components when subjected to non-sinusoidal magnetization waveforms containing higher…
🔍 Scope of IEC 62384 for LED Control Gear IEC 62384, first published in 2006 with Amendment 1 in 2009 (consolidated edition 2011), specifies performance requirements for electronic control gear supplying DC or AC power to LED modules. This standard…
🔍 Scope and Regulatory Context of IEC 62385 IEC 62385, published in 2007, provides standardized methods for assessing the performance of safety system instrument channels in nuclear power plants. These instrument channels are the critical measurement paths that provide input…
Published: May 16, 2026 | Category: Networked AV Systems | Standard: IEC 62379-5-2:2014 IEC 62379-5-2 defines the signalling protocol for the common control interface applicable to networked digital audio and video products operating over IP networks. This standard is part…