Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
💡 What is IEC TR 62809? This Technical Report provides a concise summary of requirements and tests from IEC 60601-2-66 (hearing instruments and hearing instrument systems), making the complex medical electrical equipment standard accessible to hearing aid designers and manufacturers.…
💡 What is IEC 62810? This International Standard defines a cylindrical cavity method for measuring the complex permittivity of low-loss dielectric rods at microwave frequencies, using the TM010 resonant mode for accurate, non-destructive material characterisation. 1. Scope and Measurement Principle…
Optical Heterodyne Method for Characterizing High-Speed Photodetectors and O/E Converters Overview of O/E Conversion Frequency Response Measurement IEC 62803:2016 specifies the measurement method for determining the frequency response of optical-to-electric (O/E) conversion devices used in high-frequency radio-over-fiber (RoF) systems. As…
Standardized Test Methods for PID Susceptibility Assessment in Photovoltaic Modules Understanding Potential-Induced Degradation in PV Modules IEC TS 62804-1:2015 provides test methods for detecting potential-induced degradation (PID) in crystalline silicon photovoltaic modules. PID occurs when high voltage stress between the…
Standardized Integrating Sphere Method for PV Cover Glass Optical Characterization Importance of Haze Measurement for Photovoltaic Glass IEC 62805-1:2017 defines the standardized method for measuring total haze and spectral distribution of haze in PV cover glass. Haze is the percentage…
Understanding the reproducibility and uncertainty of magnetic measurements across laboratories for hard ferrites and magnetic tape samples Introduction to IEC TR 62797 IEC/TR 62797:2013 is a Technical Report that presents the results of an international inter-laboratory comparison of magnetic moment…
A comprehensive standard covering classification, power measurement, spectral characterization, and lifetime testing of industrial infrared emitters Introduction to IEC 62798 IEC 62798:2014 is an International Standard that specifies test methods for industrial infrared (IR) emitters used in electroheating equipment. Developed…
Exploring advanced thermal indices and dosimetry models for assessing temperature rise risks during diagnostic ultrasound examinations Introduction to IEC TR 62799 IEC/TR 62799:2013 is a Technical Report that provides background information and detailed analysis of potential replacements for the conventional…
Standardized Characterization of Vpi and alpha for High-Frequency Radio-over-Fiber Applications Introduction to Mach-Zehnder Modulator Characterization Mach-Zehnder modulators (MZMs) are fundamental building blocks in modern high-frequency radio-over-fiber (RoF) systems, enabling the conversion of electrical radio signals into the optical domain for…
Requirements and performance evaluation methodologies for thunderstorm detection and early warning systems IEC 62793, published in 2016, establishes the requirements and performance evaluation methodologies for thunderstorm warning systems (TWS). Developed by IEC Technical Committee 81 (Lightning Protection), this standard provides…