Category CSA Standards

Essential Requirements for Design, Testing, and Compliance of CNG and LNG Fuel System Components Under a Harmonized North American Standard 1. Scope and Application CSA ANSI NGV 3.1-2014 (2019) / CSA 12.3-2014 (2019) establishes minimum requirements for the design, construction,…

Safety, Testing, and Compliance for Compressed Natural Gas Cylinders in North America Scope and Applicability CSA/ANSI NGV 2-19 defines the minimum requirements for new, refillable fuel containers intended for the on-board storage of compressed natural gas (CNG) on land vehicles.…

A comprehensive technical guide to performance requirements, testing protocols, and compliance strategies for NGV fueling connectors. The CSA/ANSI NGV 1-2017 standard, jointly recognized by the Canadian Standards Association (CSA Group) and the American National Standards Institute (ANSI), is the preeminent…

An in-depth look at the scope, key technical requirements, and compliance aspects of the CSA ANSI LNG 4.1-2018 standard for liquefied natural gas facilities Scope of CSA ANSI LNG 4.1-2018 CSA ANSI LNG 4.1-2018 establishes minimum requirements for the design,…

Ensuring Safety and Operational Excellence Through Standardized Competency Requirements Scope of CSA/ANSI LNG 3.14-2018 CSA/ANSI LNG 3.14-2018, developed jointly by the CSA Group and the American National Standards Institute (ANSI), establishes minimum requirements for the competence of personnel working in…

Technical Requirements, Scope, and Compliance Guidance for Fuel System Safety Scope and Application CSA ANSI LC 6-08 (2018) establishes the minimum requirements for regulator and port adaptors used in conjunction with LP‑gas cylinders that are equipped with integral valves. Integral…

Understanding the Canadian Standard for Impact-Resistant and Fragmentation-Safe Glazing Materials CAN CGSB 12.4-M91 (2017) is the Canadian standard for safety glazing in buildings, developed by the Canadian General Standards Board (CGSB). It establishes performance requirements for glazing materials used in…

Understanding the Requirements for Gas Connectors in Residential and Commercial Outdoor Applications Introduction The joint standard CSA ANSI LC 4-2012 (2017) / CSA 6.32-2012 (2016), also known as the Standard for Connectors for Outdoor Gas Appliances and Manufactured Homes, establishes…

Understanding the technical requirements, compliance, and implementation of the harmonized North American standard for gas appliance connectors The CSA ANSI LC 1-2018 (CSA 6.26-2018) standard represents a harmonized North American benchmark for flexible gas connectors used in residential and commercial…

Technical Overview of the Standard for Commercial and Residential Ground-Source Heat Pump Systems Scope and Applicability The CSA ANSI IGSHPA C448 Series-16 (2017) sets forth comprehensive design, installation, and performance requirements for ground source heat pump (GSHP) systems used in…