Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
ASTM D1015-05 (Reapproved 2015) specifies a precise procedure for measuring the freezing points of high-purity hydrocarbons. The method relies on the interpretation of time-temperature freezing or melting curves to determine an accurate freezing point, which is then used with Test…
ASTM D1006/D1006M-21 establishes standardized procedures for exterior exposure testing of paints applied to wood and wood composite materials. This practice encompasses specimen selection, preparation, paint application, and evaluation of weathering performance. 📐 Specimen Geometry and Types The selection of wood…
📜 Scope and Applicability This specification covers sec-butyl alcohol (also known as 2-butanol and secondary butanol) for use in paint, varnish, lacquer, and related products. The standard values are stated in SI units, and all specified limits are evaluated in…
📐 Specimen Geometry and Test Applicability ASTM D1004-21 is specifically designed to determine the tear resistance of flexible plastic film and sheeting. This test method measures the force required to initiate tearing by utilizing a specimen geometry that produces a…
📐 Scope and Apparatus Requirements ASTM D1005‑95 (Reapproved 2024) defines standard test methods for measuring dry‑film thickness of organic coatings including paints, varnishes, and lacquers using micrometers. The standard covers four procedures: A and B for stationary micrometers, and C…
📐 Tape Classification and Specimen Geometry ASTM D1000-24 provides standardized test methods for pressure-sensitive adhesive-coated tapes used in electrical and electronic applications. The standard classifies tapes into two primary categories based on their backing material. Class 1 encompasses non-elastomeric backings…
🔬 Overview of ASTM D1002-10 (Reapproved 2019) ASTM D1002-10 describes the determination of the apparent shear strength of adhesives for bonding metals when tested on a standard single-lap-joint specimen. This standard emphasizes that the accuracy and reliability of the test…
ASTM D1003-21 provides the standard procedures for evaluating haze and luminous transmittance of transparent plastics. Applicable primarily to planar sections of essentially transparent materials, this standard is essential for quality control in industries ranging from packaging to automotive glazing. It…
ASTM D999-08 is an important standard in the field of materials testing, providing standardized test methods and specification requirements for standard test methods for vibration testing of shipping containers. It serves as a unified technical basis for material performance evaluation,…
ASTM D996-23 is an important standard in the field of materials testing, providing standardized test methods and specification requirements for standard terminology of packaging and distribution environments. It serves as a unified technical basis for material performance evaluation, quality control,…