Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
📐 Scope and Applicable Sample Types This standard practice, designated D4309 −18, provides the general considerations for quantitative sample digestion to determine total metals in water using the closed vessel microwave heating technique. It is specifically applicable to surface, saline,…
📘 Overview and Scope of ASTM D4310-22a ASTM D4310-22a, the Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils, provides a rigorous framework for evaluating the stability of inhibited mineral oil based steam turbine lubricants…
📐 Overview and Scope of ASTM D4307-17 ASTM D4307-17 (Reapproved 2021) establishes a standard laboratory practice for the preparation of small volumes of multicomponent liquid blends intended for use as analytical standards. It is primarily applicable to components that are…
📖 Scope and Application This test method, designated ASTM D4308-24, establishes a standard procedure for the precise determination of the “rest electrical conductivity” of aviation fuels and other similar low-conductivity hydrocarbon liquids. It is specifically validated for conductivities in the…
📐 Scope and Significance of Container Selection ASTM D4306-20, under the jurisdiction of ASTM Committee D02 on Petroleum Products, Liquid Fuels, and Lubricants (Subcommittee D02.J0.04 on Additives and Electrical Properties), specifically addresses the critical role of sample containers in determining…
The ASTM D4304-22 specification defines the requirements for mineral and synthetic lubricating oils used in steam or gas turbines. This standard covers oils from API Group I, II, III, or IV, designed for use in steam and gas turbine lubrication…
📐 Scope and Summary of the Test Method ASTM D4305-98 (Reapproved 2004) covers the determination of low-temperature flow behavior through a screen-type test filter for aviation turbine fuels that may contain separated solids, such as wax. The test method provides…
ASTM D4302-14 (Reapproved 2021) establishes comprehensive requirements for the composition, physical properties, performance, and labeling of artists’ oil, resin-oil, and alkyd paints. This specification is the definitive benchmark for archival-quality artist paints, ensuring that pigments are properly identified, lightfast, and…
🧪 Test Methods for Accelerated Lightfastness ASTM D4303-10 defines four accelerated test methods to simulate the effects of long-term indoor illumination on artists’ materials. These methods are used to categorize the lightfastness of colorants. Test Method A involves exposure in…
📐 Specimen Preparation and Media Substrates ASTM D4300-23 provides two distinct methodologies to evaluate the fungal resistance of adhesive films. The approach chosen depends on the physical properties of the adhesive. For low-viscosity adhesives, the specimen is prepared by casting…
📐 Scope and Significance of D4301 Standard Test Method D4301-05 (Reapproved 2019), under the jurisdiction of ASTM Subcommittee D01.33 on Polymers and Resins, outlines a procedure for the determination of total chlorine in epoxy resins and glycidyl ethers. The values…
The ASTM D430-06 (Reapproved 2018) standard establishes testing procedures for estimating the resistance of soft rubber materials and rubber-fabric composites to dynamic fatigue. These test methods are critical for simulating the repetitive mechanical distortions encountered by rubber articles such as…