Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
ASTM D4974/D4974M defines a standard test method for measuring the hot air thermal shrinkage of yarns and cords using a thermal shrinkage oven. This method is essential for evaluating the dimensional stability of materials used in tire cords and industrial…
🔬 Overview and Scope of D4972−19 The ASTM standard D4972−19 (Reapproved 2024) provides standardized test methods for the measurement of pH in soil materials passing the 2.00 mm (No. 10) sieve. This analysis is critical for determining the degree of…
ASTM D4970/D4970M-22 provides a standardized test method for determining the resistance to pilling and other surface changes in textile fabrics using the Martindale tester. This method is essential for evaluating fabric quality and performance. 📐 Test Method Overview and Scope…
📐 Scope and Terminology ASTM D4971-16 outlines a standard procedure for estimating the in situ modulus of deformation of rock masses using a diametrically loaded borehole jack. This method is intended for use in N size drill holes and is…
📐 Scope and Classification This specification, D4969‑17 (Reapproved 2022), covers glass fabric impregnated, coated, and sintered on both sides with PTFE to a nominal thickness of 0.318 mm (0.015 in.) or less. It is intended for electrical, chemical, and mechanical uses. Structural…
📐 Scope and Purpose of the Standard ASTM D4967 – 21, issued under the fixed designation D4967, is a Standard Guide under the jurisdiction of Committee D09 on Electrical and Electronic Insulating Materials. It is specifically designed to provide a…
📐 Scope and Key Terminology ASTM D4968-19 is a standard practice meant to assist the subcommittees and sections of Committee D20 on Plastics with the process of standards evaluation during the mandatory five-year review established by ASTM. It is designed…
📐 Scope, Specimen Considerations, and Units This test method, designated D4966-22, specifically covers the determination of the abrasion resistance of textile fabrics using the Martindale abrasion tester. Under the jurisdiction of ASTM Committee D13 on Textiles and Subcommittee D13.60 on…
📐 Scope and Application of the Terminology ASTM D4965 – 96 (Reapproved 2008) provides a uniform, easily understood language for the definitions and descriptions of seams and seam finishes used in home sewing. This terminology serves as a common base…
📐 Scope and Specimen Classification The D4963/D4963M−22 standard defines a primary test method for determining the ignition loss of glass fiber textiles. It establishes a procedure applicable to a wide variety of products. As stated in the scope, this includes…
📐 Scope and Field of Application ASTM D4964 – 96 (Reapproved 2020) establishes a standardized methodology for measuring the tension and elongation of elastic fabrics using a Constant-Rate-of-Extension (CRE) type tensile testing machine. The standard applies to both wide and…
📐 Scope and Application ASTM D4962-18 standardizes the measurement of radionuclides in water using gamma-ray spectrometry with NaI(Tl) detectors. It applies to nuclides emitting gamma rays with energies greater than 50 keV. For typical systems, activity levels of about 40…