Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
📐 Scope and Terminology ASTM D5327-97 (Reapproved 2021) establishes a standardized laboratory practice for evaluating and comparing the transfer efficiency (TE) of spray-applied coatings. Transfer efficiency is strictly defined as the ratio of paint solids deposited on a target to…
📐 Scope and Significance of D5325-03 The ASTM D5325-03 (Reapproved 2021) standard formally titled Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints provides a direct laboratory method for determining the volatile fraction of aerosol…
This standard, designated D5326-22, covers a procedure for measuring color development in tinted latex paints for determining the efficiency of colorants, the tintability of base paints (or color acceptance), and the potential for poor color uniformity of applied paint films.…
📐 Types of Water-Borne Architectural Coatings The ASTM D5324-16 guide classifies water-borne architectural coatings into four types for specific applications. These coatings are organic finishes applied on-site to building surfaces at ambient temperatures. 🟦 Type 📏 Description 🎯 Typical Substrates…
📐 Scope and Applicability This practice (D5323 −19a) standardizes the determination of the 2 % secant modulus for polyethylene geomembranes. It applies to materials 0.5 mm to 5 mm thick, specifically using tensile data from D6693 The goal is to…
📋 Scope and Materials This test method, designated as D5321/D5321M-21, specifies a procedure for determining the shear resistance of a geosynthetic against soil or another geosynthetic under a constant rate of deformation. It is intended to model specific field conditions,…
ASTM D5322-23 serves as the definitive standard for conducting laboratory immersion tests on geosynthetics to evaluate their chemical resistance. Developed to address the shortcomings of the older EPA 9090 method (which has not been updated since 1992), this practice expands…
ASTM D5320-96 (Reapproved 2000) is an American National Standard for the determination of 1,1,1-trichloroethane and methylene chloride content in stabilized trichloroethylene and tetrachloroethylene. These test methods are essential for quality assurance in solvent production and reclamation, ensuring purity levels are…
📐 Scope and Significance ASTM D5318-97 provides a standard test method for determining hydrolyzable chloride content in peroxy esters and peroxy dicarbonates. These compounds are widely used as initiators and chemical intermediates in the production and modification of polymers such…
📐 Overview and Scope of D5319-22 ASTM D5319-22 is the definitive American National Standard for Glass-Fiber Reinforced Polyester (FRP) Wall and Ceiling Panels. It provides a comprehensive framework covering material classification, construction specifications, workmanship, physical requirements, and standardized testing methods.…
The ASTM D5317-20 standard defines a rigorous gas chromatographic (GC) procedure coupled with an electron capture detector (ECD) for the quantitative determination of specific chlorinated organic acid compounds and acidic herbicides in aqueous samples. This method provides a standardized framework…
🧪 Scope and Applicability of ASTM D5315-04 ASTM D5315-04 (Reapproved 2024) defines a high-performance liquid chromatographic (HPLC) test method for the determination of specific N-methyl-carbamoyloximes and N-methylcarbamates. This test method is applicable to ground water and finished drinking water, targeting…