Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE J243 provides a comprehensive set of test methods for evaluating automotive sealers, adhesives, and deadeners. Stabilized in 2021, this recommended practice covers viscosity, low temperature behavior, weld-through performance, staining, wash-off resistance, solids content, flash point, sag, bridging, and flow…
SAE J2355-1997 is an Information Report that defines a reference model for an in-vehicle data bus tailored to Intelligent Transportation Systems (ITS). Published by SAE International in 1997, this document lays the groundwork for a flexible, open architecture that allows…
The SAE J2366-4 standard, issued in 2002, defines the Thin Transport Layer (TTL) for the Intelligent Transportation Systems (ITS) Data Bus (IDB). Designed for embedded vehicle systems, this lightweight protocol operates over CAN-based networks and provides reliable data delivery through…
In 1998, SAE International published SAE J2330, a standard specifying performance requirements and test procedures for braking systems on walk-along work machines. This standard provided essential guidelines for engineers designing compact equipment such as walk-behind rollers, trowels, and similar machinery.…
This SAE Recommended Practice establishes minimum performance requirements and uniform test procedures for electric or electro-pneumatic windshield wiper switches used in trucks, buses, and multipurpose vehicles with a GVW of 4500 kg (10,000 lb) or greater. The standard covers essential…
SAE J2350 is a recommended practice covering electric blower motor switches for trucks, buses, and multipurpose vehicles. Published initially in 1997 and stabilized in 2012, this standard reflects a mature technology area where design parameters are well established. The standard…
The SAE J2315 standard provides a structured approach to evaluating the axial strength of wheel nut seats for passenger cars, light trucks, and multipurpose vehicles. It covers two primary test methods—deformation and yield strength—and offers a recommended minimum bearing surface…
SAE J2329-2024 establishes a modern classification system for low-carbon automotive sheet steels, replacing outdated deoxidation-based methods with a property-driven approach. This recommended practice defines mechanical property ranges for hot-rolled, cold-rolled, and metallic-coated sheet steels, and provides a straightforward designation system…
SAE J2293-2 (2014) is a key historical standard for electric vehicle (EV) energy transfer systems. It focuses on communication requirements and network architecture to ensure functional interoperability between the EV and off-board equipment, regardless of the coupling method used—conductive AC,…
The performance of hydraulic pumps in automatic transmissions directly affects shift quality, efficiency, and overall drivetrain reliability. SAE J2311-2020, “Automatic Transmission Hydraulic Pump Test Procedure,” provides standardized methods to characterize pump performance under controlled laboratory conditions. This article explores the…