Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE J933 is a surface vehicle recommended practice originally issued in 1965 and stabilized in February 2013. It provides baseline mechanical and quality criteria for tapping screws used in automotive and general engineering applications. Stabilized by the SAE Fasteners Committee,…
SAE J866-2019 provides a uniform identification system for brake linings, combining friction coefficient classification (based on SAE J661 tests) with environmental markings for regulated materials like copper and heavy metals (per SAE J2975). This standard does not establish performance requirements…
SAE J879B-2019 is a stabilized recommended practice that defines uniform test procedures and minimum performance requirements for motor vehicle seats, seat adjusters, and head restraints. This standard focuses on simulating inertia and occupant loads in a controlled laboratory environment, providing…
Overview and Scope of SAE J87 SAE J87 is a Recommended Practice from the Society of Automotive Engineers that establishes a maximum exterior sound level for powered mobile construction equipment. It applies to equipment with rated brake horsepower between 20…
Introduction and Purpose SAE J850-2015, Fixed Rigid Barrier Collision Tests, is a recommended practice that establishes standardized procedures for conducting barrier collision tests on automotive vehicles. Originally issued in 1963, this document was stabilized in 2015 and is retained for…
SAE J861-2022 specifies a method for testing the resistance of organic trim materials to crocking—the transfer of color due to rubbing. This standard is essential for automotive interior designers and material engineers who need to ensure that textiles, woven fabrics,…
Scope and Purpose SAE J746 provides a standardized test code for determining performance characteristics of hydraulic positive displacement motors used in off-road self-propelled work machines as defined by SAE J1116. The standard establishes test conditions, outlines test procedures, and specifies…
SAE J749-2002, titled Drawbars—Crawler Tractor, provides recommended dimensions for drawbars used on crawler tractors as defined in SAE J1057. Although cancelled and superseded by SAE J/ISO 6747 EMM, this standard remains a key reference for equipment compatibility. It specifies only…
The 2021 revision of SAE J845 provides comprehensive design guidelines, test procedures, and performance requirements for optical warning devices used on authorized emergency, maintenance, and service vehicles. This standard is essential for engineers and manufacturers developing lighting that ensures visibility…
SAE J732-2012, originally issued in 1960, was a key standard that standardized the terminology, classification, and performance specifications for loaders used in earth-moving and construction industries. It was cancelled in June 2012 and superseded by ISO 7131 and ISO 14397-1.…