Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D1539-60 is a historical standard that defines the specification for dehydrated castor acids, critical raw materials for producing drying oils, alkyd resins, and epoxy ester coatings. Derived from castor oil through a dehydration process that introduces conjugated double bonds,…
ASTM D1535-14 (Reapproved 2023) provides a definitive practice for specifying the color of opaque objects using the Munsell color order system. This system organizes colors based on the three primary attributes of color perception: hue, lightness (value), and chroma. Intended…
This article provides an overview of ASTM D1537-60, the standard specification for distilled soybean fatty acids, including property requirements and test methods. 📐 Types and Applications The standard covers three types of distilled soybean fatty acids derived from soybean oil.…
📐 Test Methods and Specimen Requirements ASTM D1531-06 provides two distinct fluid displacement procedures for determining the relative permittivity (dielectric constant) and dissipation factor of solid insulating materials. Test Method A is the Single-Fluid Technique, employing a fixed-plate, two-terminal, self-shielded…
🔍 Scope and Application of D1533-20 Standard D1533-20 provides a precise coulometric Karl Fischer titration method specifically designed for determining water content in electrical insulating liquids. It is ideally suited for test specimens where the water concentration is below 100…
📋 Test Method Overview and Scope This test method describes the determination of the approximate total acid value of used electrical insulating liquids having viscosities less than 24 cSt at 40°C. It is a simple procedure that can be applied…
📐 Scope and Materials ASTM D1527-99 covers ABS plastic pipe in Schedule 40 and 80 sizes, produced by single extrusion or coextrusion. The pipe is pressure-rated for water and intended for pressurized liquids chemically compatible with ABS. The standard includes…
🧪 Scope and Apparatus for Specific Gravity Testing ASTM D153-84 (Reapproved 2020) covers three standardized procedures for determining the specific gravity of pigments. The specific gravity value obtained by these procedures may be used with the weight of a dry…
ASTM D1524-15 (Reapproved 2022) provides a straightforward and rapid field test method for assessing the physical condition of used electrical insulating liquids. Designed for liquids sampled from transformers, oil circuit breakers, and other electrical apparatus, this visual examination allows technicians…
🧪 Test Principles and Equipment The Standard Test Method D1525-17 defines the Vicat Softening Temperature (VST) as the temperature at which a flat-ended needle of 1 mm² circular cross section penetrates a thermoplastic specimen to a depth of 1 mm.…